04.01.14
Phase A | |
Deionized water | 39.00 |
PGSS-22 Yellow N°602P (Daito Kasei) (Iron oxide (and) methoxy PEG-10 propyltrimethoxysilane) | 0.58 |
PGSS-22 Red N°211P (Daito Kasei) (Iron oxide (and )methoxy PEG-10 propyltrimethoxysilane) | 0.24 |
PGSS-22 TiO2 R250 (Daito Kasei) (Titanium dioxide (and) methoxy PEG-10 propyltrimethoxysilane) | 4.80 |
Talc superior M10 (Imerys Talc) (Talc) | 0.50 |
Versene Na2 Crystals (Dow) (Disodium EDTA) | 0.05 |
Optim Glycerine (Dow) (Glycerin) | 3.00 |
Aculyn 28 Rheology Modifier (Dow) (Acrylate/beheneth-25 methacrylate copolymer) | 1.00 |
SunSpheres PGL SPF Booster (Dow) (Styrene/acrylates copolymer) | 11.60 |
Phase B | |
Crodamol AB (Croda) (C12-15 alkyl benzoate) | 8.00 |
Glucamate SSE20 (Lubrizol) (PEG-20 methyl glucose sesquistearate) | 0.65 |
Tegocare PS (Evonik) (Methyl glucose sesquistearate) | 1.38 |
EcoSmooth Delight Polymer (Dow) (C14-22 alkane and ethylene/octene copolymer) | 2.00 |
Phase C | |
Permeathyl 99A (Presperse) (Isododecane) | 2.00 |
Neo Heliopan HMS (Symrise)(Homosalate) | 5.00 |
Neo Heliopan 303 (Symrise)(Octocrylene) | 5.00 |
Parsol MCX (DSM) (Ethyl hexyl methoxycinnamate) | 5.00 |
Neo Heliopan OS (Symrise) (Ethyl hexyl salicilate) | 4.00 |
Neo Heliopan 357 (Symrise) (Avobenzone) | 4.00 |
Phase D | |
Trisamino Ultra PC Specialty Neutralizer (solution 20%) (Dow) (Tromethamine) | q.s. to pH |
Phase E | |
Neolone PH100 (Dow) (Phenoxyethanol) | 0.66 |
Hydrolite 8 (Symrise) (Caprylyl glycol) | 0.54 |
Parfum Suntan E 1023711 (Mane) | 0.20 |
Deionized water | q.s. to 100 |
Procedure | |
Phase A: Add pigments and talc to water (premix pigments together before). Mix until dispersed. Add the other ingredients of phase A and heat to 70°C. Add ingredients of phase B and heat to 85°C under efficient mixing to ensure melting of EcoSmooth Delight. Prepare phase C, mixing ingredients and heating to 70°. Decrease temperature of phase B to 70°C with mixing. At 70°C, add phase C to phase B under mixing. Add phase B/C to phase A and stir for 2 minutes at high speed. Homogenize for 3-5 minutes at ~13000/14000 rpm. Stir with gentle mixing and cool down to temperature below 35°C. Adjust pH to 6.0 - 6.5 with phase D. Add ingredients of Phase E. | |
Properties | |
Appearance—Beige pink; pH (as is)—6.0-6.5; Viscosity (cPs) Brookfield Viscometer, LV #4, 12 rpm—10000-15000. | |
More Information | |
Dow Consumer & Industrial Solutions 800-447-4369 Email: dowcig@dow.com www.dcis.dow.com |