12.02.15
Phase A | |
Cetyl Alcohol NF (Jeen) (Cetyl alcohol) | 3.00 |
Arlacel 165 (Croda) (Glyceryl stearate; PEG-100 stearate) | 3.00 |
Liponate IPP (Lipo) (Isopropyl palmitate) | 3.00 |
Castor Oil (Jeen) (Ricinus communis (castor) seed oil) | 2.00 |
SF-30 (Sandream) (Perflurononylethyl stearyl dimethicone) | 1.00 |
Vitamin E (Sandream) (Tocopheryl acetate) | 1.00 |
Jojoba Oil (Extracts and Ingredients) (Simmondsia chinensis (jojoba) seed oil) | 1.00 |
Propyl Paraben (Sandream) (Propyl 4-hydroxybenzoate) | 0.10 |
Phase B | |
Deionized water | 76.89 |
Glycerin 99% (Jeen) (Glycerin 99%/1,2,3- propanetriol) | 5.00 |
Aloe Moist (Terry) (Aloe barbadensis leaf juice glycerin (and) glyceryl acrylate (and) propylene glycol) | 1.20 |
Carbopol 940 (Lubrizol) (Carbomer) | 0.50 |
Phase C | |
RKG (Sandream) (Raspberry ketyone glucoside) | 1.00 |
WCSA (Sandream) (Water soluble caprylol salicylic acid) | 0.50 |
DPG (Sandream) (Dipotassium glycyrrhizinate) | 0.40 |
Phase D | |
AMPD Ultra PC Neutralizer (Angus) (2- Amino-2-methylpropane-1,3 diol) | 0.40 |
Disodium EDTA (Sandream) (Disodium ehtylenediaminetetraacetic acid) | 0.01 |
Procedure | |
Preheat phase A to 65-70°C and propeller mix until solution is dissolved and homogeneous. Heat phase B in a separate large beaker to 65°C gradually adding Carbopol under rapid mixing until completely dissolved and a clear gel is formed. Add phase C to phase B and mix until dissolved. Lower heat to 50°C and stir in phase D until dissolved. Utilize a homogenizer for turbulent flow and add phase A to remaining phases which are in large beaker. Maintain temperature at 50-60°C and stir until a smooth emulsion is formed. Continue mixing for at least 15 minutes under heat and then gradually cool down the emulsion by removing heat and stir for an additional 15 minutes. A thick white cream is formed. | |
More Information | |
Sandream Enterprises, LLC 973-822-3077 Website: www.sandreamllc.com |