03.01.16
Phase A | |
KSG-210 (Dimethicone PEG-10/15 crosspolymer (and) dimethicone) | 3.00 |
KSG-15 (Cyclopentasiloxane (and) dimethicone/vinyl dimethicone crosspolymer) | 2.00 |
KF-6028 (PEG-9 Polydimethylsiloxyethyl dimethicone) | 1.00 |
KF-995 (Cyclopentasiloxane) | 5.00 |
DMF-A6 (Dimethicone) | 4.25 |
DMF-50CS (Dimethicone) | 2.00 |
Isotridecyl isononanoate | 4.00 |
KP-545 (Cyclopentasiloxane (and) acrylates/dimethicone copolymer) | 2.50 |
KF-7312J (Cyclopentasiloxane (and) trimethylsiloxysilicate) | 2.50 |
SPD-T5 (Cyclopentasiloxane (and) titanium dioxide (and) polyglyceryl-3 polydimethylsiloxyethyl dimethicone (and) aluminum hydroxide (and) stearic acid) | 10.00 |
SPD-Z5 (Zinc oxide and cyclopentasiloxane and polyglyceryl-3 polydimethylsiloxyethyl dimethicone and triethoxysilylethyl polydimethylsiloxyethyl hexyl dimethicone) | 20.00 |
Treated Pigments (Kobo) (Yellow (BGYO-TTB2) 0.56%, Red (BGRO-TTB2) 0.11%, Black (BGBO-TTB2) 0.08%)) | 0.75 |
Phase B | |
Sodium citrate | 0.20 |
Sodium chloride | 1.00 |
Glycerin | 5.00 |
Water | 34.00 |
Phase C | |
KSP-100 (Vinyl dimethicone/methicone silsesquioxane crosspolymer) | 2.00 |
Phase D | |
Phenoxyethanol (and) caprylyl glycol | 0.80 |
Procedure | |
Combine phase A under Silverson (Rotor/Stator) mixer until pigments are full dispersed. Combine phase B and mix well. Under a dispersing blade, slowly add phase B to phase A and mix for ~10 minutes under moderate shear. Reduce speed and add phase C mixing until uniform. Add phase D and mix until uniform. Add phase E and mix until uniform. | |
Properties | |
Viscosity/Stability Brookfield RVT Spindle A, Speed 5, 1 min.—6,400 CPS; Stability –RT 3 mnths, F/T (-20°C/RT 3 cycles) and 50°C 2 month—Stable. Pigment Treatment—Triethoxysilylethyl polydimethylsiloxyethyl dimethicone (KF-9908) and isopropyl titanium triisostearate. | |
More Information | |
Shin-Etsu Silicones of America, Inc. 330-630-9860 Fax: 330-630-9855 Website: www.shinetsusilicones.com/ |