Phase A | |
Deionized water | 73.65 |
Phenoxetol (Clariant) (Phenoxyethanol) | 0.50 |
Glycerin | 3.00 |
Butylene glycol, 1,3-butanediol | 3.00 |
Phase B | |
Schercemol 318 Ester (Lubrizol) (Isopropyl isostearate) | 5.00 |
Schercemol NGDO Ester (Lubrizol) (Neopentyl glycol diethylhexanoate) | 3.00 |
Xiameter PMX-200 Silicone Fluid 350cs (Dow Corning) (Dimethicone) | 2.00 |
Pristerene 4900 (Croda) (Stearic acid) | 0.20 |
Glucamate SSE-20 Emulsifier (Lubrizol) (PEG-20 methyl glucose sesquistearate) | 0.20 |
Glucate SS Emulsifier (Lubrizol) (Methyl glucose sesquistearate) | 0.20 |
Phase C | |
Novethix L-10 Polymer (30 %TS) (Lubrizol)(Acrylates/beheneth-25 methacrylate copolymer) | 1.50 |
Phase D | |
Sodium hydroxide (18%) | 0.35 |
D&C Red No. 33 (Hilton Davis) (0.1%) (Red 33 / CI 17200) | 0.15 |
Framboise 832554 (Symrise) (Fragrance) | 0.25 |
Polyox WSR-301 (1%) (Dow) (PEG-90M) | 3.00 |
Brightlette Marine Ingredient (Lipotec S.A.) (Butylene glycol (and) aqua (and) plankton extract) | 2.00 |
Uplevity Peptide (Lipotec S.A.) (Aqua (and) acetyl tetrapeptide-2 (and) caprylyl glycol) | 2.00 |
Procedure | |
Phase A: Add ingredients to batch and heat to 65-70°C. Phase B: In a separate vessel, mix ingredients of phase B and heat to 65-70°C. Mix until uniform. Add phase B to phase A at 65-70°C. Homogenize with Ultra Turrax at 3,000 rpm for 3 mins. Start cooling down to 55°C and add Novethix L-10 polymer to batch. Neutralize with Sodium Hydroxide (18%). Mix until uniform. Continue cooling down to 40°C and add ingredients of Part E successively into the batch. Mix until uniform. | |
Properties | |
Appearance —Pink yogurt-like lotion; pH—6.9 – 7.4 ; Viscosity (mPa•s)** 10,000 - 16,000 | |
More Information | |
Lubrizol Advanced Materials, Inc. 800-379-5389, 216-447-5000 Website: www.lubrizol/personalcare |