Phase A-1 | |
KSG-710 (Shin-Etsu) (Dimethicone/polyglycerin-3 Crosspolymer) | 4.00 |
USG-105 (Shin-Etsu) (Methyl trimethicone (&)dimethicone/vinyl dimethicone crosspolymer) | 1.00 |
KF-6104 (Shin-Etsu) (Polyglyceryl-3 polydimethylsiloxyethyl dimethicone) | 1.00 |
Phase A-2 | |
DMF-A6CS (Shin-Etsu) (Dimethicone) | 3.00 |
TMF-1.5 (Shin-Etsu) (Methyl trimethicone) | 7.00 |
Phase B | |
1,3-Butylene glycol | 5.00 |
Glycerin | 10.00 |
Sodium citrate | 0.20 |
Sodium chloride | 0.50 |
Phenoxyethanol | 1.00 |
Water | 59.30 |
Phase C | |
TMF-1.5 (Shin-Etsu) ((Methyl trimethicone) | 5.00 |
TSPL-30-TMF (Shin-Etsu) (Methyl trimethicone (&) Trimethylsiloxysilylcarbamoyl pullulan) | 3.00 |
Total | 100.00 |
Procedure | |
Procedure (200g): 1. Combine Phase A1 and mix well using a dispersing blade. 2. While mixing add Phase A2 to Phase A1 and mix until uniform. 3. Combine Phase B and mix well. 4. Gradually add Phase B to Phase A in a steady stream and mix for ~ 5 minutes ~ 1800 rpm. 5. In a separate vessel mix Phase C until well blended. 6. Add Phase C to Phase A+B and mix until well blended. | |
Properties | |
Appearance—White gel cream; Viscosity (24hr.)— Brookfield Heliopath RV, Spindle TC, Speed 5, 1 min @ 25°C—62,400 cps; Stabiliy— Room Temperature/2 Months, Pending; 50°C/1 Month,: Pending; Freeze/Thaw-3 cycles (-20°C/RT), Pending. | |
More Information | |
Shin-Etsu Silicones of America, Inc. Website: www.shinetsusilicones.com |