Phase A | |
Deionized water | q.s. |
SeaPure Agarose (Lonza Consumer Care) (Agarose) | 0.20 |
Glycerin | 1.00 |
Butylene glycol | 0.50 |
Carbopol 2050 (Lubrizol) | 0.55 |
Phase B | |
Natrulon H-6 (Lonza Consumer Care) (Polyglycerin-6) | 0.50 |
Natrulon H-10 (Lonza Consumer Care) (Polyglycerin-10) | 0.50 |
Cetiol CC (BASF) (Dicaprylyl carbonate) | 2.00 |
Marula Oil (Lonza Consumer Care) (Sclerocarya birrea seed oil) | 1.00 |
TEA, 99% (Triethanolamine) | 1.10 |
Phase C | |
Deionized water | 5.00 |
Niacinamide USP (Lonza Consumer Care) (Niacinamide) | 0.50 |
Carnipure Crystalline (Lonza Cosumer Care) (Carnitine) | 1.00 |
LaraCare A200 (Lonza Consumer Care) (Galactoarabinan) | 2.00 |
Phase D | |
Mikrokill COS (Lonza Consumer Care) (Phenoxyethanol (and) caprylyl glycol (and) chlorphenesin) | 0.75 |
D&C Green 5, 0.2% solution (Sensient) (D&C Green 5) | 0.20 |
Water Sleep Time Mask Type 61434 (Chemia Fragrance& Flavor) | 0.20 |
Procedure | |
Charge water of Phase A into main vessel and heat to 85°C. Add glycerin and butylene glycol of Phase A to main vessel. Sprinkle SeaPure Agarose rheology modifier of Phase A to main vessel. Hold temperature and mix well for 30 minutes. Add Carbopol of Phase A to main vessel and allow to mix for 10 minutes. Add ingredients of Phase B (except for TEA) to main vessel. Remove from heat and mix well for 15 minutes. Add TEA from Phase B to main vessel. Mix well until homogeneous. Pre mix ingredients of Phase C in a separate vessel. Mix until clearsolution forms. When main vessel has reached ~40°C, slowly add Phase C. Mix until homogeneous.Add ingredients of Phase D into main vessel. Cool to room temperature. | |
Properties | |
pH—6.5–7.5; Viscosity—40,000–50,000cps Spindle TE @ 10rpm (25°C after 24 hours); Appearance—Light blue lotion. | |
More Information | |
Lonza Consumer Care Tel: 908-561-5200 (US) • 41 61 316 81 11 (Switzerland) Website: www.lonza.com, www.lonza.com/personalcare |