Formulary

Corrective Aqua Concealer Stick

Released by Lubrizol 11.01.17

Phase A
Water (Deionized water)	10.70
Butylene glycol	3.00
Phenoxetol (Clariant) (Phenoxyethanol)	0.30
Eyeseryl Peptide Solution (Lipotec SAU) (Water (and) butylene glycol (and) acetyl tetrapeptide-5)	5.00
Avalure Flex-6 Polymer (Lubrizol Advanced Materials) (Polyurethane-62 (and) trideceth-6)	1.00
Phase B
Schercemol NGDO Ester (Lubrizol Advanced Materials) (Neopentyl glycol diethylhexanoate)	29.25
Schercemol DID Ester (Lubrizol Advanced Materials) (Diisopropyl dimer dilinoleate)	10.00
Unipure White LC 987 AS-EM (Sensient) (CI 77891 (and) triethoxycaprylylsilane)	13.75
Unipure Yellow LC 182 AS-EM (Sensient) (CI 77492 (and) triethoxycaprylylsilane)	1.60
Unipure Red LC 381 AS-EM (Sensient) (CI 77491 (and) triethoxycaprylylsilane)	0.50
Unipure Black LC 989 AS-EM (CI 77499 (and) triethoxycaprylylsilane)	0.15
RonaFlair Boroneige SF-6 (Merck KGaA) (Boron nitride)	4.00
RonaFlair LDP White (Merck KGaA) (Titanium dioxide (and) sodium potassim aluminium silicate (and) tin oxide)	1.00
EL-8051 IN Silicone Organic Elastomer Blend (Dow Corning) (Isodecyl neopentanoate (and) dimethicone/bisisobutyl PPG-20 crosspolymer)	3.00
Phase C
Cerozo RS HA/C (Baerlocher) (Ozokerite)	11.00
Kahlwax 2811 (Kahlwax) (Oryza sativa (rice) bran wax)	4.00
Phase D
Vitamine E Acetate (Tocopheryl acetate)	0.50
Allergen Free Aloe Vera (Sensient) (Fragrance)	0.25
Xiameter PMX-200 5 cs (Dow Corning) (Dimethicone)	1.00
Procedure
Weigh the ingredients of part A except the Avalure Flex-6 polymer and heat to 50°C, then add slowly Avalure Flex-6 polymer until complete dispersion then raise the temperature to 90°C (it can prepared the day before). Add part B ingredients one at a time in a suitable vessel under homogenizer at 3000 rpm for 10 minutes while heating to 100°C. Weigh part C and heat it to 100°C. Add part B to part C then add the ingredients of part D. Make the emulsion by quickly adding part B/C/D to part A at 600 rpm. Keep the bulk at 90°C until emulsion is completed. Fill the pre-heated and siliconed molds.
Properties
Appearance—Beige stick; Stability—Passed 1 month @ 50°C, 40°C, 4°C and 25°C and 5 freeze/thaw cycles; Avalure Flex-6 Polymer (wt% TS)—1.00
More Information
Lubrizol Tel: 800-379-5389 or 216-447-5000 Website: www.lubrizol.com/personal-care