Phase A | |
Water (Deionized water) | 10.70 |
Butylene glycol | 3.00 |
Phenoxetol (Clariant) (Phenoxyethanol) | 0.30 |
Eyeseryl Peptide Solution (Lipotec SAU) (Water (and) butylene glycol (and) acetyl tetrapeptide-5) | 5.00 |
Avalure Flex-6 Polymer (Lubrizol Advanced Materials) (Polyurethane-62 (and) trideceth-6) | 1.00 |
Phase B | |
Schercemol NGDO Ester (Lubrizol Advanced Materials) (Neopentyl glycol diethylhexanoate) | 29.25 |
Schercemol DID Ester (Lubrizol Advanced Materials) (Diisopropyl dimer dilinoleate) | 10.00 |
Unipure White LC 987 AS-EM (Sensient) (CI 77891 (and) triethoxycaprylylsilane) | 13.75 |
Unipure Yellow LC 182 AS-EM (Sensient) (CI 77492 (and) triethoxycaprylylsilane) | 1.60 |
Unipure Red LC 381 AS-EM (Sensient) (CI 77491 (and) triethoxycaprylylsilane) | 0.50 |
Unipure Black LC 989 AS-EM (CI 77499 (and) triethoxycaprylylsilane) | 0.15 |
RonaFlair Boroneige SF-6 (Merck KGaA) (Boron nitride) | 4.00 |
RonaFlair LDP White (Merck KGaA) (Titanium dioxide (and) sodium potassim aluminium silicate (and) tin oxide) | 1.00 |
EL-8051 IN Silicone Organic Elastomer Blend (Dow Corning) (Isodecyl neopentanoate (and) dimethicone/bisisobutyl PPG-20 crosspolymer) | 3.00 |
Phase C | |
Cerozo RS HA/C (Baerlocher) (Ozokerite) | 11.00 |
Kahlwax 2811 (Kahlwax) (Oryza sativa (rice) bran wax) | 4.00 |
Phase D | |
Vitamine E Acetate (Tocopheryl acetate) | 0.50 |
Allergen Free Aloe Vera (Sensient) (Fragrance) | 0.25 |
Xiameter PMX-200 5 cs (Dow Corning) (Dimethicone) | 1.00 |
Procedure | |
Weigh the ingredients of part A except the Avalure Flex-6 polymer and heat to 50°C, then add slowly Avalure Flex-6 polymer until complete dispersion then raise the temperature to 90°C (it can prepared the day before). Add part B ingredients one at a time in a suitable vessel under homogenizer at 3000 rpm for 10 minutes while heating to 100°C. Weigh part C and heat it to 100°C. Add part B to part C then add the ingredients of part D. Make the emulsion by quickly adding part B/C/D to part A at 600 rpm. Keep the bulk at 90°C until emulsion is completed. Fill the pre-heated and siliconed molds. | |
Properties | |
Appearance—Beige stick; Stability—Passed 1 month @ 50°C, 40°C, 4°C and 25°C and 5 freeze/thaw cycles; Avalure Flex-6 Polymer (wt% TS)—1.00 | |
More Information | |
Lubrizol Tel: 800-379-5389 or 216-447-5000 Website: www.lubrizol.com/personal-care |