Formulary

High Lavender Fragrance Roll On Stick

Released by Lubrizol 12.01.17

Phase A
Deionized water	81.77
Protachem (Protameen) Na2 (Disodium EDTA)	0.10
Pemulen EZ-4U Polymeric Emulsifier (Lubrizol Advanced Materials) 0 (Acrylates/C10-30 alkyl acrylate crosspolymer)	0.25
Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol)	3.00
Phase B
Schercemol 1818 Ester (Lubrizol Advanced Materials) (Isostearyl isostearate)	4.00
Protachem CTG (Caprylic/Capric Triglyceride)	2.00
Hydramol TGL Ester (Lubrizol Advanced Materials) (Polyglyceryl-3 laurat)	1.00
Vitamin E Acetate (Essential Ingredients)(Tocopherol acetate)	0.10
Phase C
Fixate G-100 PR Polymer (Lubrizol Advanced Matierals) (AMP-acrylates/allyl methacrylate copolymer)	3.00
Phase D
Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)	0.70
Actiphyte Lavender GL (Lipotec SAU) (Glycerin (and) water (and) lavandula angustifolia (Lavender) flower extract)	1.00
Lavender WS Fragrance # 93-0112-94 (Lebermuth) (Fragrance (parfum))	3.00
Sodium Hydroxide (20%) (BDH)	0.08
Procedure
Part A: To a suitable sized vessel that can house the selected size batch, add deionized water and heat 30 to 35°C with moderate mixing using a marine-type propeller blade. Add the Disodium EDTA and mix until dissolved. Once dissolved, discontinue heating and add the PemulenTM EZ-4U polymeric emulsifier into a slight vortex. Mix until dispersed. Once fully dispersed, add remaining part A ingredients with moderate mixing. Part B: To a separate suitable sized vessel that can hold all of part B, pre-blend ingredients 5-8; when clear and uniform, add part B to Part A slowly with moderate mixing. Part C: When uniform, slowly add the Fixate G-100 PR polymer to Parts A/B (mixing speed may have to be increased without aeration). Mix until uniform. Part D: When uniform, add ingredients 10-12 one at a time to PARTS A/B/C with moderate mixing. When uniform, use sodium hydroxide to increase pH to approximately 6.0.
Properties
Appearance—White lotion; pH—5.7-6.2;Viscosity (mPa•2) Brookfield® RV DV-II Viscometer (Brookfield AMETEK, Inc.) spindle #3 @ 20 rpm, 25 °C @ 24 hours—600-800; Yield Value (dyn/cm2)—20-40 Recommended Packaging—glass roll-on bottle with cap; Stability—passed 1 month @50°C, 3 months @25°C and 45°C passed 5 cycles freeze/thaw.
More Information
Lubrizol Advanced Materials 800-379-5389 Website: www.lubrizol.com/personal-care