Phase A | |
Deionized water | 80.52 |
Natrosol 250 HHR CS hydroxyethylcellulose (Ashland) (Hydroxyethylcellulose) | 0.50 |
Methylparaben NF (Ashland) (Methylparaben) | 0.10 |
AquaStyle SH-100 polymer (Ashland) (Acrylates copolymer (and) water) | 2.33 |
AMP-Ultra PC 2000 (Dow) (Aminomethyl propanol) | 0.25 |
Phase B | |
Style Fusion complex 1 (Ashland) (Polyquaternium-28 (and) PVM/MA copolymer) | 10.00 |
Phase C | |
Belsil DM 3096 (Wacker) (Dimethicone (and) dimethiconol) | 2.00 |
Ceraphyl 368M ester (Ashland) (Ethylhexyl palmitate) | 1.50 |
Cutissential 18-MEA 40-NV-LQ (Croda) (C10-40 (C10-40 Isoalkylamidopropylethyldimonium ethosulfate and dipropylene glycol) | 1.00 |
Optiphen 200 preservative (Ashland) (Phenoxyethanol (and) caprylyl glycol) | 0.90 |
Orchid Complex OS extract (Ashland) (Caprylic/capric triglyceride (and) cymbidium grandiflorum (orchid) flower extract) | 0.50 |
Robertet R16-3909 (Robertet) (Parfum) | 0.30 |
Phase D | |
Citric acid (10% aq sol’n) (Sigma-Aldrich) (Citric acid (and) water) | 0.10 |
Procedure | |
Phase A: Add water to main container and begin mixing with propeller agitation. Disperse Natrosol 250 HHR into vortex and mix until completely dissolved. Begin heating to 60°C. Mix for about 30 minutes until fully hydrated and solution is smooth and clear. Begin to cool. Add AquaStyle SH-100 and mix until uniform. Neutralize with AMP-Ultra PC 2000. Mix until uniform. Phase B: Add Style Fusion complex 1 to batch and mix until uniform. Add Phase C ingredients one after another waiting for each to become uniform in the batch before adding the next. Phase D: Adjust pH with citric acid as necessary. Take viscosity and pH initial and after 24 hours. | |
Properties | |
Appearance—White, opaque lotion; pH—7.0 ± 0.30; Viscosity (D0)— 5,000 – 10,000 cps (RVT, Spindle #4 @ 10 rpm). | |
More Information | |
Ashland Website: www.ashland.com |