Phase A | |
Deionized water | 68.345 |
Versene Na2 (Dow) (Disodium EDTA) | 0.100 |
FD&C Green #3 (Hilton Davis/Emerald) (0.1 wt% solution) (Green 3) | 0.020 |
Avalure Flex-6 Polymer (Lubrizol Adv. Materials) (Polyurethane-62 (and) Trideceth-6) | 0.100 |
Carbopol Ultrez 30 Polymer Lubrizol Adv. Materials) (Carbomer) | 0.400 |
Phase B | |
Sodium hydroxide (18% solution) (VWR) | 0.185 |
Phase C | |
Butylene glycol (Ruger) (1,3 butylene glycol) | 10.000 |
Glycerin (Essential Ingredients) | 10.000 |
Reproage Peptide (Lipotech SAU) (Water (Aqua) (and) disodium phosphate (and) acetyl hexapeptide-8 (and) sodium phosphate (and) caprylyl glycol) | 2.000 |
Lipomoist 2013 Molecular Film (Lipotech SAU) (Water (Aqua) (and) xanthan gum (and) caprylyl glycol (and) phenoxyethanol (and) glucose (and) chondrus crispus (carrageenan) extract (and) ethylhexylglycerin) | 7.000 |
Microcare PHG (Thor) (Caprylyl glycol (and) phenoxethanol) | 0.500 |
Phase D | |
Hydramol TGL Ester (Polyglyceryl-3 laurate) | 1.000 |
Garden Dew #129U22 (Flavors & Fragrance Specialities) | 0.050 |
Sodium hydroxide (VWR) (18% solution) | 0.300 |
Procedure | |
To a suitable vessel, add the disodium EDTA to heated deionized water (35°C to 40°C) with moderate mixing with a marine blade. When disodium EDTA is dissolved, add the color then sprinkle the Avalure Flex-6 polymer into the vortex without aeration. When uniform, discontinue heat and sprinkle Carbopol Ultrez 30 polymer into vortex. Mix until all solids are dispersed. Part B: When Part A is uniform, partially neutralize with Sodium Hydroxide. When uniform, add Part C ingredients in order, mixing well in between additions. Part D: In a separate vessel, add the fragrance to the Hydramol TGL ester (may be necessary to slightly warm the TGL), mix until uniform. When uniform, add to main vessel, mix well. PART E: When uniform, adjust pH up into range with Sodium Hydroxide. | |
Properties | |
Appearance-Light green opaque gel; pH—5.4 – 6.3; Viscosity (mPa•s) (Brookfield® RVT DVII Viscometer (Brookfield AMETEK, Inc.) spindle #6 @ 20 rpm, 1 minute, RT)—10,000 – 16,000; Recommended Packaging— Jar; Stability—In progress; Polymer (% TS)—0.5. | |
More Information | |
Lubrizol Tel.: 800-379-5389 or 216-447-5000 Website: www.lubrizol.com/personal-care |