Phase A | |
Deionized Water | 67.60 |
Protachem Na2 (Protameen) (Disodium EDTA) | 0.10 |
Pemulen EZ-4U Polymeric Emulsifier (Lubrizol) (Acrylates/C10-30 Alkyl Acrylate Crosspolymer) | 0.30 |
Zemea (DuPont Tate & Lyle) (Propanediol) | 3.00 |
Avalure Flex-6 Polymer (Lubrizol) (Polyurethane-62 (and) Trideceth-6) | 1.00 |
Glycerin | 2.00 |
Glucam P-10 Humectant (Lubrizol) (PPG-10 Methyl Glucose Ether) | 1.00 |
Phase B | |
Caprylic/Capric Triglyceride (Essential Ingredients) | 15.00 |
Schercemol CO Ester (Lubrizol) (Cetyl Ethylhexanoate) | 5.00 |
Lipochroman Molecule (Lipotec SAU) (Dimethylmethoxy Chromanol) | 0.05 |
Phase C | |
Reproage Peptide (Lipotec SAU) (Water (Aqua) (and) Disodium Phosphate (and) Acetyl Hexapeptide-8 (and) Sodium Phosphate (and) Caprylyl Glycol) | 2.00 |
Actifcol Advanced Botanical Ingredient (Lipotec SAU) (Water (Aqua) (and) Glycerin (and) Sodium Citrate (and) Lentinus Edodes Extract (and) Potassium Sorbate (and) Sodium Benzoate (and) Phytic Acid) | 2.00 |
Microcare PE (Thor) (Phenoxyethanol) | 0.50 |
Aloe Waters #129U27 (Flavors &. Fragrances Specialties) | 0.10 |
Phase D | |
Sodium Hydroxide (20% Solution) | 0.35 |
Procedure | |
PART A: To a suitable vessel, add Disodium EDTA to heated Deionized Water (35°C to 40°C) with moderate mixing with a marine blade. When Disodium EDTA is dissolved, sprinkle Pemulen EZ-4U polymeric emulsifier into vortex. When uniform, discontinue heat and add Zemea Propendiol. When uniform, sprinkle Avalure Flex-6 polymer into vortex. When uniform, add Glycerin and Glucam P-10 humectant. PART B: In a different vessel, add Caprylic Capric Triglyceride and Schercemol CO ester, heat 35°C to 40°C with moderate mixing (marine type blade), and then sprinkle Lipochroman molecule into vortex. Mix until dissolved. When uniform, add PART B to PART A with moderate mixing. PART C: When uniform and below 30°C, add Reproage Peptide, Actifcol Advanced Botanical Ingredient, Microcare PE, and Fragrance. PART D: When uniform, adjust pH up into range with Sodium Hydroxide. | |
Properties | |
Appearance—White cream; pH—5.6 – 6.4; Viscosity (mPa•s) (Brookfield® RVT DVII Viscometer (Brookfield AMETEK, Inc.) spindle #7 @ 20 rpm, 1 minute, RT)—26,000 – 34,000; Recommended packaging–Jar; Stability—In progress; Polymer (% TS)—1.3 | |
More Information | |
Lubrizol Advanced Materials Tel: 800-379-5389, 216-447-5000 Website: www.lubrizol.com/personal-care |