Formulary

Morning Call Moisturizing Serum

Released by Lubrizol 07.02.18

Phase A
Deionized water	68.345
Versene Na2 (Dow) (Disodium EDTA)	0.100
FD&C Green #3 (Hilton Davis/Emerald) (0.1 wt % solution) (Green 3)	0.020
Avalure Flex-6 Polymer (Lubrizol Adv. Materials) (Polyurethane-62 (and) trideceth-6)	0.100
Carbopol Ultrez 30 Polymer (Lubrizol Advanced Materials) (Carbomer)	0.400
Phase B
Sodium hydroxide (VWR) (18% solution)	0.185
Phase C
1, 3 Butylene glycol (Ruger) (Butylene glycol)	10.000
Glycerin (Essential Ingredients)	10.000
Reproage Peptide (Lipotec SAU) (Water (Aqua) (and) disodium phosphate (and) acetyl hexapeptide-8 (and) sodium phosphate (and) caprylyl glycol)	2.000
Lipomoist 2013 Molecular Film (Lipotec SAU) (Water (aqua) (and) xanthan gum (and) caprylyl glycol (and) phenoxyethanol (and) glucose (and) chondrus crispus (carrageenan) extract (and) ethylhexylglycerin)	7.000
Microcare PHG (Thor) (Caprylyl glycol (and) phenoxethanol)	0.500
Phase D
Hydramol TGL Ester (Lubrizol Adv. Materials) (Polyglyceryl-3 laurate)	1.000
Garden Dew #129U22 (Flavors & Fragrance Specialties) (Fragrance)	0.050
Phase E
Sodium hydroxide (18% solution)	0.300
Procedure
To a suitable vessel, add the disodium EDTA to heated deionized water (35°C to 40°C) with moderate mixing with a marine blade. When disodium EDTA is dissolved, add the color then sprinkle the Avalure Flex-6 polymer into the vortex without aeration. When uniform, discontinue heat and sprinkle Carbopol Ultrez 30 polymer into vortex. Mix until all solids are dispersed. When part A is uniform, partially neutralize with sodium Hhydroxide. When uniform, add part C ingredients in order, mixing well in between additions. In a separate vessel, add the fragrance to the HydramolTM TGL ester (may be necessary to slightly warm the TGL), mix until uniform. When uniform, add to main vessel, mix well. When uniform, adjust pH up into range with sodium hydroxide.
Properties
Appearance—Light green opaque gel; pH—5.4-6.3; Viscosity (mPa•s) Brookfield® RVT DVII Viscometer (Brookfield Ametek, Inc.) spindle #6 @ 20 rpm, 1 minute, RT —10,000-16,000 Recommended Packaging—Jar; Stability—Passed 4 weeks at 50 °C, Passed 12 weeks at 25 & 45 °C, Passed 5 freeze/thaw cycles.
More Information
Lubrizol Advanced Materials Tel: 800-379-5389, 216-447-5000 Website: www.lubrizol.com/personal-care