Formulary

In-Shower Bubble Gum Body Cream

Released by Lubrizol 09.03.18

Phase A
Glycerin	37.20
Carbopol* Ultrez 30 Polymer (Lubrizol) (Carbomer)	0.50
Deionized water	20.00
Disodium EDTA (10%)	1.00
Phenoxyethanol (ICMD)	0.30
Red 33 (Sun Chemical) (0.1%)	0.20
Phase B
Schercemol DISD Ester (Lubrizol) (Diisostearyl dimer dilinoleate)	18.00
Schercemol 1818 Ester (Lubrizol) (Isostearyl isostearate)	10.00
Schercemol NGDO Ester (Lubrizol) (Neopentyl glycol diethylhexanoate)	7.00
Phase C
Sodium hydroxide (18%)	0.50
Phase D
Merquat 3330PR Polymer (Lubrizol) (9% TS) (Polyquaternium-39)	1.00
Actiphyte Pomegranate GL (Lipotec SAU) (Glycerin (and) water (and) punica granatum extract)	2.00
Actiphyte Grapefruit GL (Lipotec SAU) (Glycerin (and) water (and) citrus grandis (grapefruit) fruit extract)	2.00
Parfume Passionfruit # 1-15509-26 (Holland Aromatics)(Fragrance)	0.30
Procedure
Part A: Disperse Carbopol Ultrez 30 polymer in glycerin. Mix until a uniform gel is obtained (~15min at 2000rpm). Add the remaining ingredients of part A successively into the batch and mix until uniform. Part B: In a separate vessel, premix Schercemol DISD, 1818 and NGDO esters. Mix until uniform. Add part B to part A. Homogenize at 3,000 rpm for 5min. Neutralize with sodium hydroxide (18%) to pH 5.5–6.0. Mix until uniform. Add successively Merquat* 3330PR polymer, Actiphyte extracts, and fragrance successively into the batch and mix well between each addition.
Properties
Appearance—Pink gummy paste; pH—5.3 – 5.7; Viscosity (mPa•s) **30,000 – 50,000; Stability—Passed 1 month at 50 °C and 3 months at RT & 40 °C; passed 5 cycles Freeze/thaw; Brookfield RVT Viscosimeter (Brookfield AMETEK, Inc.) spindle #7 @20 rpm, 25°C @ 24 hours
More Information
Lubrizol Website: www.lubrizol.com/personal-care