Phase A-1 | |
DI water (Sensient) | q.s. |
Laponite KLG-XR (Eckart America) (Lithium magnesium sodium silicate) | 0.50 |
Phase A-2 | |
Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol ) | 3.00 |
Unipure Yellow LC 188 PHY (Sensient) (CI 77492 (and) phytic acid (and) sodium hydroxide) | 0.55 |
Unipure Red LC 388 PHY (Sensient) (CI 77491(and) phytic acid (and) sodium hydroxide) | 0.15 |
Unipure Black LC 998 PHY (Sensient) (CI 77499 (and) phytic acid (and) sodium hydroxide) | 0.05 |
Phase A-3 | |
Covacryl RH (Sensient) (Sodium polyacrylate) | 0.40 |
Glycerin | 2.00 |
Euxyl PE-9010 (schülke) (Phenoxyethanol (and) ethylhexylglycerin) | 0.70 |
5% Natpure CellGum Plus in Water (Sensient)(Microcrystalline cellulose (and) cellulose gum (and) cellulose) | 5.00 |
Phase B | |
Covascreen UVR CCT (Sensient) (Caprylic/capric tri-glyceride (and) titanium dioxide (and) triethoxycaprylylsilane) | 15.00 |
Montanov 68 (Seppic) (Cetearyl alcohol (and) cetearyl glucoside) | 3.00 |
Jeechem GMS 165 (Jeen) (Glyceryl stearate (and) PEG-100 stearate) | 1.50 |
Dermofeel Sensolv (Evonik Dr. Straetmans) (Isoamyl laurate) | 1.00 |
Covabead Crystal (Sensient) (Calcium sodium borosilicate) | 3.00 |
Cetyl stearyl alcohol (Seppic) (Cetearyl alcohol) | 1.50 |
Florasun 90 (Floratech) (Helianthus annuus (sunflower) seed oil) | 4.50 |
Phase C | |
Natpure Film GR (Sensient) (Glyceryl rosinate(and) aqua (and) cellulose (and) sodium sulfate) | 5.00 |
Diamond (Sensient) (Fragrance) | 0.10 |
Phase D | |
20% Citric acid in water (Citric acid) | pH=7.0 |
Procedure | |
Premix phase A1 until clear. Premix phase A2 and A3. Add phase A2 into A1 under moderate shear at 500rpm for 10 minutes. 2.Add phase A3 into phase A under moderate shear. Mix phase A until homogenous for 5 minutes. Heat phase A to 75°C. 3.Prepare phase B and heat to 75°C. Mix under moderate shear. 4.Add phase B to phase A at 75°C with high shear at 1,500 rpm for 1 minute. Homogenize the batch at 5,000rpm for 3 minutes at 75°C. 5.Mix the batch with propeller blade, decrease the mixing speed to 500 rpm. Cool down the batch to 40°C. Add phase C into the batch. Continue to mix for 5 minutes. 6.At 25°C, adjust the pH to 7.0 by adding 20% citric acid in water into the batch. | |
More Information | |
Sensient Tel: 908-757-4500 Email: cosmeticsales@sensient-tech.com Website: www.sensient-cosmetics.com |