Phase A | |
Deionized water | 59.65 |
Pemulen EZ-4U (Lubrizol) (Polymeric emulsifier (Acrylates/C10-30 alkyl acrylate crosspolymer) | 0.30 |
Xanthan gum | 0.20 |
Disodium EDTA (10%) | 1.00 |
Phenoxyethanol (ICMD) | 0.50 |
Glycerin | 5.00 |
Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol) | 5.00 |
Red 33 (0.1%) (Sun Chemical) | 1.00 |
Blue 1 (0.1%) (Sun Chemical) | 1.00 |
Phase B | |
Schercemol C) Ester (Lubrizol) (Cetyl ethylhexanoate) | 10.00 |
Schercemol 318 Ester (Lubrizol) (Isopropyl isostearate) | 10.00 |
Glucate DO Emulsifier (Lubrizol) (Methyl glucose dioleate | 0.50 |
Glucate SS Emulsifier (Lubrizol) (Methyl glucose sesquistearate) | 0.50 |
Phase C | |
Sodium hydroxide (18%) | 0.25 |
Phase D | |
Actiphyte Acai Berry GL (Lipotec SAU) (Glycerin (and) water (and) euterpe oleracea fruit extract) | 2.00 |
Actiphyte Pomegranate GL (Lipotec SAU) (Glycerin (and) water (and) punica granatum extract) | 2.00 |
Antarcticine Marine Ingredient C (Lipotec SAU) (Aqua (and) pseudoalteromonas ferment extract (and) caprylyl glycol) | 1.00 |
Grenade #971979 (Symrise) (Fragrance) | 0.10 |
Procedure | |
Part A: Disperse Pemulen EZ-4U polymeric emulsifier and xanthan gum in deionized water under agitation and continue mixing until uniform. Add ingredient 3–9 of part A successively into the batch and mix until uniform between each addition. Part B: In a separate vessel, premix Glucate SS emulsifier and Schercemol CO ester, and mix at 55–60°C until complete dissolution of Glucate SS emulsifier. Add Glucate DO emulsifier and Schercemol 318 ester into the vessel to decrease the temperature down to 40°C. Add Part B to the batch and homogenize with Ultra Turrax for 3 minutes at 3,000 rpm. Neutralize with sodium hydroxide (18%) to pH 5.0–5.5. Mix until uniform. Add Actiphyte extracts, Antarcticine marine ingredient, and fragrance successively into the main vessel and mix until uniform. | |
Properties | |
Appearance at RT—Violet lotion; Appearance at -20°C—Smoothie-like consistency; pH—5.0–5.5; Viscosity (mPa•s) Brookfield RVT Viscosimeter (Brookfield AMETEK, Inc.) spindle #5 @ 20 rpm, 25 °C @ 24 hours—7,000–12,000; Stability—Passed 1 month at 50 °C and 3 months at RT & 40 °C; Passed 20 cycles Freeze/thaw. Note—PEG-derived ingredients are not intentionally added in the manufacture. | |
More Information | |
Lubrizol Advanced Materials Tel: 800-379-5389, 216-447-5000 Website: : www.lubrizol.com/personal-care |