Phase A | |
Deionized water | 36.000 |
Benecel K200M HPMC (stock solution 1.0% active)(Ashland) (Hydroxypropyl methylcellulose) | 12.250 |
Captivates A009 Encapsulate (Ashland)(Microencapsulated fragrance w/malodor control technology) | 0.690 |
Phase B | |
Tomadol 25-7 (Evonik) (Linear alcohol 7-mole ethoxylate) | 4.000 |
Tomadol 1-73B (Evonik) (Linear alcohol 73B-mole ethoxylate) | 0.300 |
R16-4225 (Robtertet) (Fragrance oil) | 0.300 |
Tinopal CBS-X (90% active) (BASF) (Distyrylbiphenyl sulfonate sodium salt) | 0.050 |
Deionized water | 20.000 |
Trilon M (40% active) (BASF) (Methylglycine diacetic acid trisodium salt) | 4.000 |
Phase C | |
BioSoft D62LT (60.11% active) (Stepan) (Dodecyl benzene sulfonate, sodium salt) | 12.600 |
Steol CS-370 (70% active) (Stepan) (Dodecyl 3-mole ethoxy sulfate, sodium salt) | 6.075 |
Liquitint blue HB (Miliken) (Blue colorant) | 0.025 |
Citric acid (100% active) (stock solution 30% active) (adjust pH to 7.5-8.0) | 0.700 |
Deionized water | 3.010 |
Procedure | |
Weigh deionized water and Benecel K200M HPMC into a mixing vessel and mix at room temperature until homogenous. A vortex should be established from top to bottom of the mixing vessel, at all times throughout the preparation when mixing. Add Captivates A009 encapsulates into the vessel and mix until a homogenous dispersion is formed. Do not over mix. For phase B, weigh the ingredients into a separate vessel. Mix after each addition until homogenous. Add phase B to phase A with vigorous mixing until homogenous. For phase C, weigh Biosoft D-62LT surfactant into a separate vessel followed by Steol CS-370 surfactant and pre-mix. Add phase C with mixing to Phases A and B. Add Liquitint Blue HB colorant and mix until uniform in color. Adjust the pH to 7.5-8.0 and add the balance of the deionized water to complete the batch preparation. | |
More Information | |
Ashland Tel: 877-546-2782 Website: Ashland.com/personalcare |