Phase A | |
Deionized water | 79.42 |
Stabylen 30 (Coast Southwest, 3V Sigma-USA) (Acrylates/vinyl isodecanoate crosspolymer) | 0.85 |
Endiquest GLDA (Coast Southwest) (Tetrasodium glutamate diacetate) | 0.50 |
Phase B | |
Endicare TN (Coast Southwest) (C12-15 alkyl benzoate) | 5.00 |
Endicare OMC (Coast Southwest) (Ethylhexyl methoxycinnamate) | 7.50 |
Uvasorb MET (Coast Southwest, 3V Sigma-USA) (Benzophenone-3) | 3.00 |
Endicare AB (Coast Southwest) (Butyl methoxydibenzoylmethane) | 2.00 |
Phase C | |
Triethanolamine 99 (TEA99) (Coast Southwest, Ineos Oxide) (Triethanolamine) | 0.73 |
Phase D | |
Sharomix DMP (Coast Southwest, Sharon-Laboratories) (Diazolidinyl urea (and) methylparaben (and) propylparaben (and) propylene glycol) | 1.00 |
Procedure | |
Phase A – Add Phase A to main vessel with continuous shear mixing. Note: Disperse polymer slowly. Phase B – In a separate vessel, combine phase B in formula order under continuous mixing while heating to 167˚F to 176˚F (75˚C to 80˚C). Once uniform, add phase B to phase A under shear mixing. Phase C – Add phase C to main vessel under continuous mixing. Phase D – When main vessel is less than 104˚F (40˚C), add phase D with continuous mixing. Homogenize if needed to enhance uniformity. Transfer to final container. | |
Properties | |
pH—5.5 to 6.0; Viscosity—spindle 06 @ 6.0 rpm = 70,000 to 100,000 cst. | |
More Information | |
Coast Southwest, Inc. Tel. 800-621-0500 Email: info@coastsouthwest.com Website: www.coastsouthwest.com |