Formulary

Kisameet Glacial Clay Facial Peel-off Masque

Released by Coast Southwest, Inc. 07.01.19

Phase A
Deionized water	63.70
MPDiol (Coast Southwest, Inc., Lyondellbasell) (Methyl Propanediol)	3.00
Tetrasodium EDTA (Tetrasodium EDTA)	0.10
Glycerin (Coast Southwest, Inc.) (Glycerin)	3.00
Phase B
Coast PVA-24 (Coast Southwest, Inc.) (Polyvinyl alcohol)	7.00
Phase C
Kisameet Glacial Clay (Coast Southwest, Inc., Kisameet Glacial Clay, Inc.) (Clay)	7.00
Phase D
Jojoba Oil (Coast Southwest, Jojoba Desert (A.C.S.) Ltd.) (Simmondsia Chinensis (Jojoba) (Seed Oil)	5.00
Acai Butter (Coast Southwest, Inc., International Cosmetic Science Centre (ICSC)) (Euterpe Oleracea Fruit Oil (and) Butyrospermum Parkii (Shea) Nut Extract (and) Elaeis Guineensis (Palm) Oil)	3.00
Baobab Oil (Coast Southwest, Inc., International Cosmetic Science Centre (ICSC)) (Adansonia Digitata Seed Oil)	2.00
Avocado Oil (Coast Southwest, Inc.) (Persea Gratissima (Avocado) Oil)	3.00
Glossamer L6600 (Coast Southwest, Inc.) (Brassica Campestris/Aleurites Fordi Oil Copolymer)	0.50
Phase E
Astaderm 200 (Coast Southwest, Inc.) (Porphyridium Polysaccharide)	2.00
Phase F
Sharomix Amplify AM25 (Coast Southwest, Sharon-Labs) (Phenoxyethanol (and) Chlorophenesin (and) Caprylyl Glycol (and) Didecyldimonium Chloride)	0.70
Procedure
Phase A-In main vessel, combine Phase A with propeller mixing. Mix until fully uniform. Phase B – Add Phase B to the main vessel at 130°F to 135°F (50°F to 55°C) and continue to heat to 176°F to 194°F (80°C to 90°C). Once the desired temperature is reached and all of Phase B seems to be solubilized, cover the main vessel and hold the temperature for 10 to 15 minutes. Then discontinue heat and begin to cool down. Phase C – When the main vessel (Phase AB) has reached 140°F (60°C), add Phase C into the formula under propeller mixing (300 to 400 rpm) until fully uniform and evenly dispersed. Phase D – Once the main vessel reaches 140°F (60°C), add Phase D to Phase ABC under propeller mixing and continue to cool to 100°F to 113°F (40°C to 45°C). Phase E – Phase F – Add Phase E to Phase ABCD at 100°F to 113°F (40°C to 45°C) followed by Phase F and continue to cool to room temperature. Transfer the mixture to final container.
Properties
pH—5.5 to 6.5; Viscosity—N/A.
More Information
Coast Southwest, Inc. Tel: 800-621-0500 • Email: info@coastsouthwest.com Website: www.coastsouthwest.com