Phase A | |
Deionized water | 63.70 |
MPDiol (Coast Southwest, Inc., Lyondellbasell) (Methyl Propanediol) | 3.00 |
Tetrasodium EDTA (Tetrasodium EDTA) | 0.10 |
Glycerin (Coast Southwest, Inc.) (Glycerin) | 3.00 |
Phase B | |
Coast PVA-24 (Coast Southwest, Inc.) (Polyvinyl alcohol) | 7.00 |
Phase C | |
Kisameet Glacial Clay (Coast Southwest, Inc., Kisameet Glacial Clay, Inc.) (Clay) | 7.00 |
Phase D | |
Jojoba Oil (Coast Southwest, Jojoba Desert (A.C.S.) Ltd.) (Simmondsia Chinensis (Jojoba) (Seed Oil) | 5.00 |
Acai Butter (Coast Southwest, Inc., International Cosmetic Science Centre (ICSC)) (Euterpe Oleracea Fruit Oil (and) Butyrospermum Parkii (Shea) Nut Extract (and) Elaeis Guineensis (Palm) Oil) | 3.00 |
Baobab Oil (Coast Southwest, Inc., International Cosmetic Science Centre (ICSC)) (Adansonia Digitata Seed Oil) | 2.00 |
Avocado Oil (Coast Southwest, Inc.) (Persea Gratissima (Avocado) Oil) | 3.00 |
Glossamer L6600 (Coast Southwest, Inc.) (Brassica Campestris/Aleurites Fordi Oil Copolymer) | 0.50 |
Phase E | |
Astaderm 200 (Coast Southwest, Inc.) (Porphyridium Polysaccharide) | 2.00 |
Phase F | |
Sharomix Amplify AM25 (Coast Southwest, Sharon-Labs) (Phenoxyethanol (and) Chlorophenesin (and) Caprylyl Glycol (and) Didecyldimonium Chloride) | 0.70 |
Procedure | |
Phase A-In main vessel, combine Phase A with propeller mixing. Mix until fully uniform. Phase B – Add Phase B to the main vessel at 130°F to 135°F (50°F to 55°C) and continue to heat to 176°F to 194°F (80°C to 90°C). Once the desired temperature is reached and all of Phase B seems to be solubilized, cover the main vessel and hold the temperature for 10 to 15 minutes. Then discontinue heat and begin to cool down. Phase C – When the main vessel (Phase AB) has reached 140°F (60°C), add Phase C into the formula under propeller mixing (300 to 400 rpm) until fully uniform and evenly dispersed. Phase D – Once the main vessel reaches 140°F (60°C), add Phase D to Phase ABC under propeller mixing and continue to cool to 100°F to 113°F (40°C to 45°C). Phase E – Phase F – Add Phase E to Phase ABCD at 100°F to 113°F (40°C to 45°C) followed by Phase F and continue to cool to room temperature. Transfer the mixture to final container. | |
Properties | |
pH—5.5 to 6.5; Viscosity—N/A. | |
More Information | |
Coast Southwest, Inc. Tel: 800-621-0500 • Email: info@coastsouthwest.com Website: www.coastsouthwest.com |