Phase A | |
Floramac 10 (Floratech) (Ethyl macadamiate) | 26.20 |
PureSyn 2 (Sandream Impact) (Hydrogenated polydecene) | 13.53 |
Fancol ID-CG (Elementis) (Isododecane) | 4.78 |
Jeesilc PS-PTVL (Jeen) (Phenyltrimethicone, dimethicone/vinyl dimethicone crosspolymer) | 3.54 |
Sansil D308 (Sandream) (Dimethicone/vinyl dimethicone crosspolymer) | 2.00 |
Phase B | |
Micropoly 250S (Micro Powders) (Polyethylene) | 4.82 |
Candellila Wax (Strahl & Pitsch) (Euphorbia cerifera (candellila) wax) | 3.12 |
Microcrystalline Wax (Strahl & Pitsch) (Microcrystalline wax) | 2.12 |
Synchrowax HR-C (Croda) (Tribehenin) | 0.66 |
Phase C | |
Fiesta Precious Coral FCM-PC7 (Sandream)(Synthetic fluor-)phlogopite, TiO2, red 40, tin oxide, triethoxycaprylylsilane | 17.00 |
PMMA H (Brenntag) (Polymethyl methacrylate) | 7.25 |
SanTalc 511 (Sandream Impact) (Talc) | 5.00 |
SanSilica 307 (Sandream Impact) (Silica) | 4.62 |
Phase D | |
Benzophenone-3 (Sandream Impact) (Benzophenone-3) | 2.72 |
Euxyl PE 9010 (Schulke) (Phenoxyethanol, ethylglycerin) | 1.32 |
Vitamin E (Sandream Impact) (Tocopheryl acetate) | 1.32 |
Procedure | |
Preheat phase A to 90°C in a glass beaker and propeller mix until solution is dissolved and homogeneous. Mix phase B in a separate beaker at 95°C and stir until completely melted. Slowly add phase B to A and mix under propeller agitation until fully incorporated and uniform. Add phase C to A & B and slowly combine using a homogenizer. Premix phase D in a separate beaker at 70°C until uniform then add to phase A, B, C. Continue mixing until a smooth, creamy and homogeneous solution is present. Lower temperature of the batch to 70°C and pour into desired pans. | |
More Information | |
Sandream Impact Website: www.sandreamimpact.com |