Formulary

Anti-Pollution Defender Gel

Released by Coast Southwest, Inc. 10.01.19

Phase A
Deionized Water	83.91
Easygel Sol (Coast Southwest Inc., 3V Sigma USA) (Carbomer)	0.30
Glycerin 99.7 USP Kosher (Coast Southwest)(Glycerin)	3.00
Endiquest GLDA (Coast Southwest Inc.) (Tetrasodium glutamate diacetate)	0.05
Phase B
Endimate 33V (Coast Southwest Inc.) (Caprylic/capric triglyceride)	4.00
Rosehip Oil (Coast Southwest, International Cosmetic Science Centre (ICSC)) (Rosa canina fruit extract)	2.00
Avocado Oil (Coast Southwest, International Cosmetic Science Centre (ICSC)) (Persea gratissima (avocado) oil)	3.00
Endimulse CS-20D (Coast Southwest) (Cetearyl alcohol, ceteareth 20)	1.00
Endimulse GMS-SE (Coast Southwest) (Glyceryl stearate SE)	0.75
Glossamer L6600 (Coast Southwest Inc.) (Brassica campestris/aleurites fordi oil copolymer)	1.00
Phase C
NaOH 30% aq. Solution (Sodium hydroxide)	0.235
Phase D
X50 Photoglow Solution (Coast Southwest, Infinitec Barcelona) (Aqua, xanthan gum, chlorella vulgaris extract, lactic acid, glycolic acid, polyvinyl alcohol)	0.003
X50 Skin Barrier Suspension (PF) (Coast Southwest, Infinitec Barcelona) (Aqua, xanthan gum, palmitoyl heptapeptide-27, palmitoyl oligopeptide-78, lactic acid/glycolic acid copolymer, polyvinyl alcohol, palmitoyl, octapeptide-24, phenoxyethanol, caprylyl glycol, glycerin, glyceryl caprylate, phenylpropanol)	0.003
Phase E
Sharomix Amplify AM24 (Coast Southwest, Sharon-Laboratories) (Caprylyl glycol, methylpropanediol, didecyldimonium chloride, polyquaternium-80)	0.50
Phase F
Olivatis 15C (Coast Southwest Inc., Medolla Limited) (Olive oil PEG-8 esters)	0.25
Fragrance	q.s.
Color	q.s.
Procedure
Combine phase A ingredients in main vessel with propeller mixing. Begin heating to 149-158°F (65-70°C) and mix until fully uniform. In a separate vessel, combine phase B ingredients and heat to 158-167°F (70-75°C). Add phase B to phase A under propeller mixing (500 rpm) until fully uniform and evenly dispersed. Add phase C, mix well. Then, begin cool down. When the main vessel has reached 104-133°F (40-45°C), add phase D ingredients and mix until uniform. Once the main vessel has reached room temperature, add Phase E ingredients under propeller mixing. Combine phase F ingredients separately and mix well. Add phase F to main vessel and mix until uniform. Transfer the mixture to final container.
Properties
pH—5.5 to 6.5; Viscosity—Spindle 5 x 10.0 rpm = 25,000 to 30,000 cst.
More Information
Coast Southwest Inc. Tel: 800-621-0500 Email: info@coastsouthwest.com Website: www.coastsouthwest.com