Released by Ashland
Happi Staff09.03.20
Phase A | |
Ethyl alcohol | 73.30 |
Klucel H CS/PC HPC (Ashland) (Hydroxypropylcellulose) | 1.10 |
Phase B | |
Deionized water (Aqua) | 23.10 |
Phase C | |
Ceraphyl 31 ester (Ashland) (Lauryl lactate, myristyllactate, cetyllactate) | 1.00 |
Glycerin | 1.50 |
Procedure | |
Prepare phase A by adding Klucel HPC to ethanol under good agitation to make a slurry. Mix phase A for about 5 minutes or until all HPC is wetted and polymer is not floating on the surface of the ethanol Add water (phase B) while mixing and continue mixing. Mix for about 45 minutes or until solution is smooth and lump-free. Adjust mixing speed so that solution “turns-over.” Add phase C ingredients while mixing. | |
Properties | |
Appearance—clear to translucent gel; Viscosity (Brookfield LVT sp64 @ 30 rpm 25°C)—4,000-6,000 cP. | |
More Information | |
Ashland Website: www.ashland.com |