Phase A | |
Water | 42.46 |
Sodium Gluconate Granular (Jungbunzlauer Ladenburg GMBH) (Sodium Gluconate) | 0.20 |
Biomer (Maycos Italiana) (Potato starch modified) | 0.50 |
Propanediol | 30.00 |
Dermosoft Octiol (Dr. Straetmans) (Caprylyl glycol) | 0.20 |
Phase B | |
Tego Care 450 MB (Evonik) (Polyglyceryl-3 methylglucose distearate) | 3.00 |
Tegin M Pellets MB (Evonik) (Glyceryl stearate) | 2.00 |
Lanette 18 (Basf) (Stearyl alcohol) | 1.00 |
Cetiol 868 (Basf) (Ethylhexyl stearate) | 7.00 |
Cetiol SN (Basf) (Cetearyl isononanoate) | 7.00 |
Argan oil (DSM Nutritional Products Ltd) (Argania spinosa kernel oil) | 0.50 |
Xiameter PMX-200 Sil Fluid 100 CS (DOW Corning Corp) (Dimethicone) | 2.00 |
Amphisol K (DSM Nutritional Products Ltd) (Potassium cetyl phosphate) | 0.50 |
Phase C | |
Quali B – D-Panthenol 75 L (DSM Nutritional Products Ltd) | 3.00 |
Quali B – Vitamin B12 Cryst (DSM Nutritional Products Ltd) (Cyanocobalamin) | 0.01 |
Perfume Sail Away 49454695 (Drom Fragrances GMBH & KO. KG) | 0.50 |
Phase D | |
Citric Acid 10% Solution (Jungbunzlauer Ladenburg GMBH) (Citric acid) | 0.13 |
Procedure | |
Premix water and sodium gluconate under stirring. Sprinkle Biomer under stirring and mix until a clump-free gel is obtained. Create a premix with glycols and add to A under stirring. Heat Phase A up to 75°C under stirring. Mix and heat Phase B to 80°C under stirring. Add Phase B into Phase A and homogenize with an Ultra-Turrax. The formulation thickens during the emulsification step. Let cool down to room temperature under stirring with a defloculeuse. Below 35°C, add the ingredients of Phase C one by one. Adjust the pH around 5.50 if necessary. | |
Properties | |
pH:—5.76; Viscosity: (Brookfield RV5/10rpm)—26 600 mPas. | |
More Information | |
DSM www.DSM.com |