Phase A | |
Water | 30.45 |
Dissolvine NA2-S (Disodium EDTA) | 0.10 |
V Allantoin (Coast Southwest Inc., 3V Sigma USA) (Allantoin) | 0.05 |
Endicare SC-530 (Coast Southwest) (Polyethyloxazoline) | 1.00 |
Phase B | |
Endimate 163 (Coast Southwest) (Ethylhexyl tearate (and) ethylhexyl palmitate (and) diethylhexyl adipate) | 8.00 |
JD Jojoba Butter (Coast Southwest Inc., Jojoba Desert (A.C.S) Ltd) (Simmondsia chinensis (Jojoba) seed oil(and) cera alba (and) hydrogenated vegetable oil) | 0.50 |
Phase C | |
Olivatis 21 (Coast Southwest Inc., Medolla Specialty Chemicals) (Olive oil PEG-6 esters) (and) olive oil polyglyceryl-6 esters) | 4.00 |
Olivatis 18 (Coast Southwest Inc., Medolla Specialty Chemicals) (Olive oil Polyglyceryl-6 esters (and) sodium stearoyl lactylate (and) cetearyl alcohol) | 7.00 |
Glyceryl Tribehenate | 0.35 |
Phase D | |
Dispersion 108321 (Coast Southwest Inc. Dynamic Cosmetics, Inc. | 8.50 |
Boron Nitride FF (Boron nitride) | 0.30 |
Phase E | |
Dispersion 120128 (Coast Southwest Inc. Dynamic Cosmetics, Inc.) | 35.00 |
Phase F | |
umiglow (Coast Southwest Inc., Novachem S.R.L.) (Water (and) glycerin (and) Aristotelia chilensis fruit extract) | 2.00 |
Bluescreen (Coast Southwest Inc., Novachem S.R.L.) (Water (and) glycerin (and) alcohol (and) sodium PCA (and) Plantago lanceolata leaf extract (and) Fabiana imbricata leaf/stem extract (and) Verbascum thapsus extract (and) Achyrocline satureioides flower extract) | 2.00 |
Phase G | |
Sharomix EG14 (Coast Southwest Inc., Sharon-Laboratories Ltd.) (Ethylhexylglycerin (and) phenoxyethanol) | 0.75 |
Procedure | |
Phase A - In main vessel, weigh out Phase A, mix and heat to 65℃ to 70℃. Phases B/C - In side vessel, add Phase B followed by Phase C and heat to 65℃ to 70℃ with mixing. Phase D - Once Phase B/C reaches temperature, add Phase D. Mix until uniform. When Phases A and D are at temperature, add Phase D to Phase A with moderate shear mixing. Discontinue heat when the solution is uniform. Allow the batch to cool to 50℃. Phase E - Add Phase E. Mix until dispersed completely. Allow the batch to cool to 40℃ to 45℃. Phase F - Add Phase F. Mix until uniform. Phase G - Add Phase G and cool batch to 25℃ to 30℃ to transfer. | |
Properties | |
pH: 6 to 7; viscosity: #4 @ 30 rpm (25℃) - 2,000 to 5,000 cst. | |
More Information | |
Coast Southwest, Inc. 1-800-621-0500 |