05.06.13
Phase A | |
Talc M/DS 4R (Sandream) (Talc, dimethicone, magnesium myristate) | 25.28 |
Mica LL3 (Sandream) (Mica lauroyl/lysine) | 27.00 |
Bi-glo 0120 (Sandream) (Bismuth oxychloride) | 11.00 |
Micropoly 250S (Micropowders) (Polyethylene) | 4.60 |
Zinc stearate | 4.60 |
Octyldodecyl Oleate (Sandream) | 2.21 |
Jeecide Phenoxy (Jeen) (Phenoxyethanol) | 1.00 |
Propylparaben (Sandream) | 0.10 |
Methylparaben (Sandream) | 0.30 |
Ecoperse Black IO (65%) (Sandream) (Black iron oxide, octyldodecyl oleate) | 0.17 |
Ecoperse Yellow IO (45%) (Sandream) (Yellow iron oxide, toctydodecyl oleate) | 1.57 |
Ecoperse Red IO (45%) (Sandream) (Red iron oxide, toctyldodecyl oleate) | 0.67 |
Phase B | |
DP Opal (Sandream) | 18.00 |
Phase C | |
Dow Corning 556 fluid (Dow Corning) (Phenyltrimethicone) | 3.50 |
Procedure | |
Phase A (powder phase)u2014When weighing each material in phase A, use spoon to manually mix in between. Using a blender, blend for 3-4 minutes on high setting to ensure uniform mixing. Use spoon in between each minute to manually mix to ensure top and bottom uniform phase. Shake jar/container (u201cmasonu201d jars recommended) to ensure powder is uniform. Phase B (pearl phase)u2014Using spoon, blend and mix manually to incorporate pearl. Shake jar/container to ensure uniformity. Phase C (oil phase): Premix phase C in a separate beaker. First, mix Dow Corning 556 fluid, Jeecide Phenoxy, propylparaben and methylparaben over low heat until all particles have dissolved. Then, add all other ingredients of Phase C into the beaker and mix well (overhead stirrer recommended). Slowly add phase C with pipet to phase A & B. Blend on high for 1 min. Stop, shake jar, manually mix with spoon, and scrape walls. Continue blending for 30sec. intervals until powder is uniform. Weigh each face piece approximately 8.5g and press. | |
More Information | |
Sandream Enterprises, LLCn973-822-3077nFax: 973-882-3088nwww.sandreamllc.com |