Phase A | |
Water | 39.36 |
Linquest EDTA 100 (Disodium EDTA) | 0.1 |
Glycerin 99% USPK | 2.00 |
MarGel SF 1 (Acrylates copolymer) | 6.00 |
ColaTeric L-32 (Sodium | 14.29 |
Elotant SCA (Sodium cocoyl | 15.00 |
Elotant Milcoside 303 | 4.00 |
ColaTeric CBS-HP | 8.35 |
Ultra AMP-95 (ANGUS) | 0.1 |
Lincoserve HPH-6 | 1.00 |
Citric Acid 50% | 0.6 |
NuSolutions EZ Guar 14 (Guar | 1.00 |
SugaDET EcoPearl (Glycol | 5.00 |
SalColor FX White to Black | 3.00 |
Fragrance Premix Linsorb 20 (Polysorbate 20) | 0.1 |
Kaduka Plum | 0.1 |
Procedure | |
Add water to beaker (25-30°C preferable) and start mixer with gentle agitation. Add Linquest EDTA 100 and glycerin, mix until uniform. Slowly add MarGel SF-1 to main vessel under gentle mixing. Mix until homogenous. Slowly add ColaTeric L-32 to main vessel under gentle mixing (as to not allow foaming). Mix until homogenous. Slowly add Elotant SCA to main vessel under gentle mixing (as to not allow foaming). Mix until homogenous. Slowly add Milcoside 303 and ColaTeric CBS-HP to main vessel under gentle mixing (as to not allow foaming). Mix until homogenous. Add Ultra AMP-95 to main vessel and mix until homogenous (batch will thicken). Add Lincoserve HPH-6 and Citric acid solution to main vessel and mix until homogenous. Add NuSolutions EZ Guar 14 and SugaDET EcoPearl to batch and mix until homogenous. Slowly add Salcolor FX White to Black to batch under gentle mixing and mix until homogenous. Fragrance Pre-Mix: In a side vessel, add Linsorb 20 and fragrance and stir gently. Add Fragrance Pre-Mix to main vessel and mix until homogenous. Appearance: Off-white with suspended beads. Odor: Kaduka plum. Viscosity: 15,000-20,000 cps. pH: 6.8-7.2. | |
More Information | |
Barentz www.barentz-na.com |