Phase A | |
D.I. Water | 49.5 |
Zemea propanediol (Dupont) | 5.0 |
Sodium chloride | 1.0 |
Silube PCH (Siltech) (Polyglyceryl-4 isostearate (and) Cetyl PEG/PPG-10/1 dimethicone (and) Hexyl laurate) | 6.0 |
Silwax A08-UP (Siltech) (Caprylyl methicone) | 4.0 |
Siltech CE-2000 (Siltech) (Trictyldodecyl citrate) | 8.0 |
Tinasorb M (BASF) (Methylene bis-benzatriazolyl tetramethulbutylpheno (nano) | 1.0 |
Phase B | |
Paracera W80 (Paramelt) (Crystalline wax) | 1.5 |
Escalol 517 (Ashland) (Butyl methoxydibenzoylmethane) | 1.0 |
DIM 2F650T4 (Kobo) (TiO2, Dimethicone, Polyglyceryl-3 polydimethylsiloxyethyl dimethicone, Alumina, Hydrogen dimethicone) | 12.0 |
ZinClear XP 65 Coco (Antaria) (Zinc oxide, Coco-caprylate/caprate, Polyglyceryl-3 polyricinoleate, Isoteric acid) | 10.0 |
Phase C | |
Zeastat (Inolex) (Caprylhydroxamic acid (and) Propanediol) | 1.0 |
Procedure | |
Combine phase A and mix well. Heat up to 80°C. Combine all ingredients in phase B, mix well and then heat up to 85°C. Continue mixing for a minimum of 10 minutes. Add phase A into phase B slowly under moderate mixing rate. After addition, high shear at 3,000 rpm for 2 minutes. Cool batch to room temperature and keep mixing. Add phase C while mixing. | |
More Information | |
Developed by Siltech www.siltech.com |