Phase A | |
Deionized water | 66.30 |
Dissolvine 220-S (Coast Southwest/Akzo Nobel Functional Chemicals) (Tetrasodium EDTA) | 0.20 |
1,3 butylene glycol (Coast Southwest) (Butylene glycol) | 3.00 |
Allantoin (Coast Southwest, 3V Inc.) (Allantoin) | .50 |
Sorbitol 70% (Coast Southwest) (Sorbitol) | 4.00 |
Glycerin (Coast Southwest) (Glycerin) | 4.00 |
Phase B | |
Crealba Aquasol (Coast Southwest) (Limnanthes alba (Meadowfoam) seed oil (and) PEG-6) | 2.00 |
Endimate 33V (Coast Southwest) (Caprylic/capric triglyceride) | 3.00 |
Avocado Oil (Coast Southwest) (Avocado oil) | 5.00 |
Alaphaflow 40 (Coast Southwest) (Hydrogenated polydecene) | 3.00 |
Meadowfoam Seed Oil (Coast Southwest) (Limnanthes alba (meadowfoam) seed oil) | 3.00 |
Vitamin E Acetate (Coast Southwest) (Tocopheryl acetate) | 1.00 |
Phase C | |
Sharomix 705 (Coast Southwest/Sharon Laboratories) (Benzoic acid (and) sorbic acid (and) dehydroacetic acid (and) benzyl alcohol) | 1.00 |
Phase D | |
Endicare ETP-305 (Coast Southwest) (Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7) | 4.00 |
Procedure | |
Phase A – In main beaker, add phase A compounds with propeller mixing. The final water phase should be clear and uniform. Phase B – In separate beaker, add phase B compounds, and then mix until a uniform translucent yellow solution is obtained. Next, increase mixing until reaching a small vortex and add phase B slowly to phase A. The solution will become turbid and thin. Phase C– Add phase C to Phase AB and allow batch to mix for 1-2 minutes. Phase D – Weigh out phase D, and then add slowly to the phase ABC batch. Increase mixing as needed since the batch will start to thicken toward the end of the addition of phase D. The batch will turn white. Mix for an additional 1-5 minutes until homogeneous. | |
Properties | |
pH—5.65; Viscosity—Spindle #4 at 2.5 rpm at 25C – 73,000. | |
More Information | |
Coast Southwest, Inc. 800-621-0500 Fax: 714-524-8363 Email: [email protected] Website: www.coastsouthwest.com |