Phase A | |
Deionized water | 66.27 |
Tetrasodium EDTA | 0.10 |
Liponic EG-1 (Lipo Chemicals) (Glycereth-26) | 3.00 |
UltraThix P-100 (Ashland) (Acrylic acid/VP crosspolymer) | 0.40 |
Preservative | q.s. |
Phase B | |
Liponyl 601 BN SPEC (Lipo Chemicals) (Mica (and) boron nitride) | 3.00 |
BTD 401 (Kobo) (TiO2 (and) isopropyl titanium triisostearate) | 5.75 |
BYO-I2 (Kobo) (Iron oxides (C.I. 77492) (and) isopropyl titanium triisostearate) | 0.75 |
BRO-I2 (Kobo) (Iron oxides (C.I. 77491) (and) isopropyl titanium triisostearate) | 0.15 |
BBO-I2 (Kobo) (Iron oxides (C.I. 77499) (and) isopropyl titanium triisostearate) | 0.08 |
Phase C | |
Lipomulse Luxe (Lipo Chemicals) (Cetearyl alcohol (and) glyceryl stearate(and) PEG-40 stearate (and) ceteareth-20) | 5.00 |
Jojoba Buttercreme (Lipo Chemicals/Desert Whale Jojoba) (Butyrospermum parkii (shea butter) (and) jojoba alcohol (and) potassium jojobate (and) simmondsia chinensis (jojoba) butter (and) propanediol) | 4.00 |
Parsol MCX (DSM) (Octymethoxy cinnimate or octinoxate) | 7.50 |
Liponate ISA (Lipo Chemicals) (Isostearic acid) | 1.50 |
Vitamin E Acetate (Tocopheryl acetate) | 0.50 |
Phase D | |
Biopolymer BHA-10 (Lipo Chemcials) (Polyquaternium-10 (and) hyaluronic acid) | 2.00 |
Procedure | |
In the main kettle, disperse Ultrathix P-100 into phase A with rapid mixing, mix for 15 minutes or until free of lumps, then heat to 70-75°C. Grind/blend phase B until uniform, then add to phase A while rapid mixing. In a separate vessel, heat phase C to 75-80°C and mix well. Slowly add phase C to phase A with medium mixing until a smooth emulsion is formed. Start to cool. Continue mixing on medium speed, scraping sides often. Add phase D, when temperature is at or below 35°C, continue mixing and cooling to 25°C. | |
Properties | |
pH—6.0 ± 0.3; Viscosity—430,000 cps ± 10% (RVT/TE/0.6rpm); Stability—1 month at 50°C. | |
More Information | |
Lipo Chemicals 973-345-8600 Fax: 973-345-8365 Website: www.lipochemicals.com |