Formulary

Volumizing Shampoo

Innospec Performance Chemicals Formulary

Released by Innospec Performance Chemicals 10.01.18

Phase A
Water	q.s. to 100
Natrlquest E30 (Innospec) (Trisodium ethylenediamine disuccinate)	0.20
Activsoft CD (Innospec) (Guar hydroxypropyltrimonium chloride)	0.30
Citric Acid solution (50%) (Citric acid and water)	Trace
Phase B
EGMS (Glycol stearate)	1.50
Iselux (Innospec) (Sodium lauroyl methyl isethionate)	5.50
Pureact I-78C (Innospec) (Sodium cocoyl isethionate)	1.30
Pureact WS Conc (Innospec) (Sodium methyl cocoyl taurate)	12.50
Phase C
Sopalex 360 BET (SCT) (Cocamidopropyl betaine)	15.00
Phase D
Microsil Volume (Innospec) (Propoxytetramethyl piperidinyl dimethicone (and) cetrimonium chloride (and) trideceth- 6 and C11-15 pareth-7)	5.00
TroyCare FE003 (Troy) (Phenoxyethanol and iodopropynyl butylcarbamate)	0.80
Phase E
Water	10.00
Carbopol Aqua SF-2 (Lubrizol) (Acrylates copolymer-4)	5.00
Phase F
NaOH solution (25%) (Sodium hydroxide and water)	q.s.
Phase G
Sodium Chloride	q.s.
Procedure
Charge water into main vessel. Add Natrlquest E30. With high mixing, sprinkle in the Activsoft CD. Mix until dispersed. Add a trace amount of citric acid solution. Batch will clear. Begin heating batch to 50°C. Add Phase B sequentially. Heat and mix until uniform. Cut the heat off. Add phase C. At 40-45°C, add phase D one at a time. In a side vessel, pre-mix Phase E. Slowly add the pre-mix to the batch in aliquots. Do not add all at once. Adjust the pH using the sodium hydroxide solution to 6.0-7.0. Viscosity can be tweaked further with the addition of sodium chloride.
Properties
Appearance— Pearlized White; pH—6.0-7.0; Viscosity—6000-7000 cps *Brookfield DV-E @ 20 rpm, 25°C, #5 Spindle; Stability—Successfully completed 8 weeks at RT, 45°C, 5°C, and 3 Freeze/Thaw Cycles
More Information
Innospec Performance Chemicals Tel: 704-633-8028 • Website: www.innospecinc.com