04.01.12
Phase A | |
Water (aqua) (deionized) | 70.98 |
Phase B | |
Versene 220 Crystals (Dow Chemical) (Tetrasodium EDTA) | 0.02 |
Phase C | |
Rhodicare XC (Rhodia) (Xanthan Gum) | 0.20 |
Phase D | |
Propylene Glycol USP (Lyondell) (Propylene glycol) | 3.00 |
CoSept PEP (HallStar) (Phenoxyethanol, methylparaben, ethylparaben, butylparaben, propylparaben, isobutylparaben) | 0.60 |
BioChemica Jojoba Oil - Ultra Refined (HallStar) (Simmondsia chinensis (jojoba) seed oil) | 3.00 |
BioChemica Sunflower Seed Oil (HallStar) (Helianthus annuus (sunflower) seed oil) | 2.00 |
BioChemica Shea Butter u0097 Ultra Refined (HallStar) (Butyrospermum parkii (shea butter)) | 3.00 |
HallStar GMS SE/AS (HallStar) (Glyceryl stearate, PEG-100 stearate) | 3.00 |
HallStar TA-1618 Cetearyl Alcohol (HallStar) (Cetearyl alcohol) | 0.70 |
RTD HC-40 (HallStar) (PEG-40 Hydrogenated castor oil) | 1.00 |
BHT (Merisol Antioxidants) (BHT) | 0.08 |
Regu-Fade (DSM Nutritional) (Resveratrol) | 0.10 |
Phase E | |
HallStar GC (HallStar) (Caprylic/capric triglycerides) | 5.00 |
Phase F | |
HallStar GMS Pure (HallStar) (Glyceryl stearate) | 0.32 |
Phase G | |
SolaStay S1 (HallStar) (Ethylhexyl methoxycrylene) | 4.00 |
Phase H | |
BioChemica Vitamin E Natural (HallStar) (Tocopherol) | 1.00 |
Phase I | |
MSS-500W (Kobo Products) (Silica) | 2.00 |
Procedure | |
To a suitable vessel equipped with mixing, heating and cooling capabilities, add phase A and phase B and start mixing. When phase B is dissolved, add phase C. When phase C is fully hydrated, start heating to 140°F (60°C). Premix phase D and add during the heating of this water phase. In a separate vessel, combine phase E, start mixing, heat to 158°F (70°C), then add phase F in order. Mix until homogeneous, then cool this oil phase to 149°F (65°C). In another vessel, add phase G and heat to 140°F (60°C). Mix well. Add phase H, in order, to G with mixing. When homogeneous, add GH to EF with mixing. When both are homogeneous and at their designated temperatures, immediately add the oil phase (phase EFGH) to the water phase (phase ABCD) with continued mixing at a high shear for two minutes. Homogenize for 10 minutes and then resume mixing and start cooling. At 122°F (50°C) or lower, add phase I and mix well. Cool to ambient temperature and then add water as needed to bring to full batch mass. When again uniform, stop mixing, perform final quality assurance checks and package product. | |
Properties | |
(25°C): Appearanceu2014Light yellow lotion; Viscosity (RV, T-D, 5, 20 & 100 rpm, cP)u201410800, 3500 & 1120; pHu20146.0. | |
More Information | |
The HallStar Company 877-427-4255 or 312-385-4494 Fax: 908-852-1335 Email: customerservice@hallstar.com www.hallstar.com |