Released by Innospec Performance Chemicals
Happi Staff12.02.19
Phase A | |
Aqua | q.s. to 100 |
Polyquta 400 KC (KCI Limited) (Polyquaternium-10) | 0.20 |
Phase B | |
Pureact WS Conc (Innospec) (Sodium methyl cocoyl taurate) | 9.40 |
Pureact Gluco L (Innospec) (Lauryl glucoside) | 3.60 |
Pureact MS-CG (Innospec) (Sodium methyl oleoyl taurate) | 3.60 |
Pureact LSR (Innospec) (Sodium lauroyl sarcosinate) | 1.35 |
Phase C | |
Surfac SB09 (Surfachem) (Cocamidopropyl hydroxysultaine) | 9.40 |
Phase D | |
Sodium benzoate | 0.50 |
Phase E | |
Pomette (Azur Fragrances) (Fragrance) | 0.50 |
Phase F | |
Citric acid (50% w/w) | q.s. to pH 4.2-4.7 |
Phase G | |
Sodium chloride | qs to 4,500-8,000cps (max 0.8%) |
Procedure | |
To a vortex of aqua add Polyquta 400 KC and mix until fully dispersed and clear. Heat phase A to 40-45°C. Homogenize Pureact WS Conc, Pureact Gluco L and Pureact MS-CG, by heating to 40-45°C and mixing products before adding to main vessel. Sequentially add the ingredients in phase B and mix until uniform and clear. Slowly add Surfac SB09 to main vessel and mix until uniform. Cool vessel to below 40°C and then add preservative mix until clear and uniform. Add fragrance and mix until fully emulsified and clear. Adjust pH to 4.2-4.7 with citric acid solution (50%w/w) as required. Add small aliquots of sodium chloride, (0.2%w/w) as required until desired viscosity of 4,500-8,000cps obtained. (0- 0.8%)w/w. | |
Properties | |
Appearance—clear viscous liquid; pH—4.2-4.7; Viscosity—8,000-11,000 cPs; Stability—Passed 12 Weeks 45°C, 20°C and 5°C and 3 F/T cycles. | |
More Information | |
Innospec: Website: www.innospecinc.com Tel: 303-792-5554 |