Released by Coast Southwest, Inc.
Happi Staff01.06.21
Phase A | |
Deionized water | 42.65 |
Xanthan gum | 0.50 |
Endinol Mild B-SF65A (Coast Southwest Inc.) (Sodium cocoyl isethionate, cocamidopropyl hydroxysultaine, lauryl glucoside, cocamidopropylamine oxide, caprylyl/capryl glucoside) | 23.00 |
Phase B | |
Jojoba Oil (Coast Southwest Inc./Jojoba Desert (A.C.S. LTD) (Simmondsia chinensis (jojoba) seed oil) | 5.75 |
Coconut Oil (Coast Southwest Inc./International Cosmetic Science Centre (ICSC)) (Cocos nucifera (coconut) oil) | 5.75 |
Cetearyl alcohol | 2.30 |
Phase C | |
Olivatis 19 (Coast Southwest Inc./Medolla Iberia) (Olive oil polyglyceryl-6 esters, phospholipids) | 2.30 |
Olivatis 18 (Coast Southwest Inc./Medolla Iberia) (Olive oil polyglyceryl-6 esters, sodium stearoyl lactylate, cetearyl alcohol) | 4.75 |
Phase D | |
Kisolite BMP (Coast Southwest Inc./Kisolite Corp.) (Clay) | 12.00 |
Phase E | |
Lavender Oil (Lavandula angustifolia (lavender) flower oil) | 0.20 |
Sharomix Amplify AM25 (Coast Southwest/Sharon-Laboratories Ltd.) (Phenoxyethanol, chlorphenesin, caprylyl glycol, didecyldimonium chloride) | 0.80 |
Procedure | |
Phase A—In main vessel with mixing, disperse xanthan gum in water. Add Endinol Mild B-SF65A. Heat to 65°C. Phase B—In a separate vessel, heat and mix phase B to 65°C to 70°C. Phase C—At 60°C, add phase C to phase B. When phases A and BC reach temperature, add phase BC to phase A. Increase speed as needed; avoid introducing air. Phase D - Maintain temperature and slowly add phase D to phase ABC. The solution will appear discontinuous; allow the solution to wet out completely until uniform. Discontinue heat and allow phase ABCD to cool. Phase E—At 40°C, add phase E to phase ABCD. Transfer to holding vessel. Product will continue to thicken. | |
Properties | |
pH—5.5 to 7.5; Viscosity—Spindle 5@20 = 15,000 – 18,000 cps. | |
More Information | |
Coast Southwest Inc. 800-621-0500 info@coastsouthwest.com www.coastsouthwest.com |