Phase A | |
Water | 88.10 |
Zemea propanediol (Covation Biosciences) (Propanediol) | 5.00 |
Sodium cocoyl glutamate (Clariant) (Hostapon CGN) | 1.00 |
Phase B | |
Floresters 15 (Floratech) (Jojoba esters, tocopherol) | 2.50 |
Floramac 10 (Floratech) (Ethyl macadamiate) | 0.50 |
Fancol Polyiso CG-450 (Elementis) (Hydrogenerated polyisobutene) | 0.25 |
Pemulen TR-2 (Lubrizol) (Acrylates/C10-30/Alkyl acrylate crosspolymer) | 0.25 |
Phase C | |
Velsan EHG (Clariant) (Ethylhexylglycerine) | 0.10 |
Phenoxyethanol (Clariant) | 0.90 |
Water (and) Sodium hydroxide (NaOH 25% Solution) | q.s. |
Merquat 3330PR (Lubrizol) (Polyquaternium-39) | 0.90 |
AN242912 (Arylessence) (Himalayan Salt Concept WS) | 0.50 |
Procedure | |
Combine phase A in an appropriate vessel. Mix thoroughly. In a separate container, add phase B components, one at a time, mixing thoroughly after each addition. Note the Pemulen TR-2 will only be dispersed and will not go clear. Once the dispersion is uniform, it’s ready to transfer. Once both phases are homogenous, add the phase B mixture to the phase A mixture. Mix thoroughly. Once the A/B mixture is homogenous, add the Velsan and the Phenoxyethanol to the mixture, mixing thoroughly. Use the NaOH solution to adjust the pH to approximately 7. Once the pH has been adjusted, add the remaining phase C components, and mix thoroughly after each addition. | |
Properties | |
Appearance: Milky, watery liquid. pH: 7.06. | |
More Information | |
Essential Ingredients www.essentialingredients.com 770-831-9010 |