Phase A | |
DP Bronze (Sandream Specialties) (TiO2, Mica, Iron oxide) | 50.00 |
Phase B | |
NatureGel MC750 (Micro Powders, Inc.) (Cocos nucifera (coconut) oil, Brassica campestris (Rapeseed) seed oil, Microcrystalline cellulose, Polyhydroxystear acid, Cetearyl olivate, Sorbitan olivate, Tocopheryl acetate) | 50.00 |
Procedure | |
Weight Phase A (high impact pearl or blend of pearls of your choice) in a blender. Weigh out NatureGel MC750 (Part B) and divide into approximately five equivalent portions. Add first weighed out NatureGel MC750 portion into the blender jar. Step 1): tilt/toss blender jar up and down a few times until the NatureGel MC750 portion is completely coated with the pearl particles. Continue incorporating remaining portions of NatureGel MC750 as in Step 3. When all NatureGel MC750 portions are well coated with pearl particles, blend the entire batch at the slowest speed for 15 seconds; scrape the jar walls and bottom well. Blend again for five seconds. If necessary, repeat one more time until you achieve the desired free flowing gelled pearl particles (entrapped gel pearl capsules). Screen the entire batch using soft bristle brush via 20 mesh sieve first and then via 30 mesh sieve. Use all the beads that remain on the 30 mesh screen. Eye Shadow Package: Use a small clear pot type package, with a large hole (3 or more) sifter and top cap. Fill approximately 50-60% volume of the gel pearl capsules in the pot, replace the sifter and then cap the pot. | |
More Information | |
Micro Powders, Inc. www.micropowders.com |