07.01.07
Phase A | |
Deionized water | 36.13 |
Acrylates Copolymer (30%), Carbopol Aqua SF-1 Polymer | 5.00 |
Sodium Laureth Sulfate (3 Mole, 28%), Sulfochem ES-3 Surfactant | 30.00 |
Sodium Hydroxide (18%) | ~ 0.90 (q.s. to pH 6.5) |
Phase B | |
Cocamidopropyl Hydroxysultaine (50%), Chembetaine CAS Surfactant | 10.00 |
Disodium Laureth Sulfoccinate (40%), Chemccinate DSLS Surfactant | 10.00 |
Phase C | |
Deionized water | 3.00 |
Mica (and) Titanium Dioxide, Timiron Starluster MP 115 | 0.20 |
Phase D | |
Dimethicone (60,000 cSt), Dow Corning 200 Fluid | 3.00 |
Phenoxyethanol, Methyl-, Ethyl-, Propyl-, Butyl-, and Isobutylparaben, Phenonip | 0.50 |
Fragrance, Rain Fresh # J6746 | 0.50 |
Yellow 10 (0.1%) | 0.07 |
Blue 1 (0.1%) | 0.30 |
Citric Acid (50%) | ~0.40 (q.s. to pH 5.5) |
Procedure | |
1. Combine PART A: Add Carbopol®* Aqua SF-1 Polymer to deionized water. Add Sulfochem™* ES-3 Surfactant with gentle mixing. 2. Neutralize to pH 6.5 with sodium hydroxide. 3. Add PART B ingredients to the batch in order, while mixing. 4. Premix PART C ingredients, and add to batch. Mix until uniform. 5. Add PART D ingredients to batch in order listed. Mix until uniform. 6. Adjust pH to 5.5 with citric acid. | |
Properties | |
Appearance: Satiny, pearlized viscous liquid pH: 5.3 – 5.7 Viscosity, (mPa·s)****: 4,000 – 7,000 Yield Value (dyn/cm²): 100 – 150 Stability: Passed 3 months @ 45°C, 5 cycles freeze/thaw Carbopol®* Aqua SF-1 Polymer Actives, 1.5% Surfactant Actives, 17.4% **** Brookfield RVT @ 20 rpm, 25°C, #5 spindle, measured after 24 hours | |
More Information | |
Lubrizol North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location |