Phase A | |
Deionized water | 72.06 |
Disodium EDTA (Ruger Chemical) | 0.10 |
Pemulen TR-1 (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer) | 0.11 |
Liponic EG-1 (Lipo Chemcials) (Glycereth-26) | 2.50 |
Liponate PC (Lipo Chemicals) (Propylene glycol dicaprylate/dicaprate) | 5.00u2028 |
Liponate DPC-6 (Lipo Chemicals) (Dipentaerythrityl hexacaprate) | 5.00u2028 |
Liponate NEB (Lipo Chemcials) (C12-15 alkyl benzoate) | 7.00 |
Lipolight OAP/PVA (Lipo Chemicals) (Nylon-12 u2028fluorescent brightener 230 Salt (and) polyvinylalcohol crosspolymer | 2.00 |
Phase B | |
Lipomulse Luxe (Lipo Chemicals) (Cetearyl alcohol (and) glyceryl stearate (and) PEG-40 stearate (and) ceteareth-20) | 5.00u2028 |
Phase C | |
NaOH 18% Sol. (Ruger Chemicals) (Sodium hydroxide) | 0.23 |
Phase D | |
Orgasol Caresse (Polyamide-5) | 1.00 |
Phase E | |
Preservative | q.s. |
Procedure | |
Mix phase A ingredients at 80u02daC with medium speed propeller stirring. Mix Sequence phase B ingredients and heat to 80°C. Add phase B to phase A under propeller mixer. Mix for 15 minutes or until the emulsification is completed. Start cooling batch down with medium mixing. At 45°C, add phase C ingredient with continued mixing. Add remaining sequence with mixing and continue cooling. Shutdown mixing when batch reaches 32°C. | |
Properties | |
pHu20144.90 u00b1 0.2; Viscosityu2014TF at 3 rpm (Helipath:ON) = 155,300 cps u00b1 10%; Stability: 30 days at 50°C. | |
More Information | |
Lipo Chemicals Inc. 973-345-8600 u2022 Fax: 973-345-8365 www.lipochemicals.com |