Phase A | |
Purifed water | q.s. 100 |
Disodium EDTA | 0.10 |
Stabileze QM Polymer (Ashland) (PVM/MA decadiene Crosspolymer) | 0.50 |
Lubrajel Marine Hydrogel (Ashland) (Glycerin (and) sodium PCA (and) erythritol (and) chondrus crispus powder (and) xanthan gum) | 4.00 |
Phase B | |
ProLipid 141 Lamellar Gel (Ashland) (Glyceryl stearate (and) behenyl alcohol (and) palmitic acid (and) stearic acid (and) lecithin (and) lauryl alcohol (and) myristyl alcohol (and) cetyl alcohol) | 4.00 |
Refined Shea Butter (Ashland) (Butyrospermum parkii (shea) butter) | 1.00 |
Emulsynt GDL Ester (Ashland) (Glyceryl dilaurate) | 2.00 |
Ceraphyl ODS Ester (Ashland) (Octyldodecyl stearate) | 2.00 |
Ceraphyl SLK Ester (Ashland) (Isodecyl neopentanoate ) | 5.00 |
Ceraphyl 368 Ester (Ashland) (Ethylhexyl palmitate) | 3.00 |
Belsil PDM 20 (Wacker) (Trimethylsiloxyphenyl dimethicone) | 3.00 |
Serenityl Biofunctional (Ashland) (Marsdenia condurango bark extract) | 1.00 |
Phase C | |
Sodium hydroxide | 0.13 |
Purified water | 2.00 |
Phase D | |
Optiphen DP Preservative (Ashland) (Propylene carbonate (and) benzoic acid (and) dehydroacetic acid (and) propanediol) | 1.00 |
Optiphen OD Preservative Booster (Ashland) (Caprylyl glycol) | 0.50 |
Phase E | |
Purified water | 10.00 |
Natrosol Plus 330 CS HMHEC (Ashland) (Cetyl hydroxyethylcellulose) | 0.10 |
Phase F | |
PF Mineral Defense 8509133 (Charabot/Robertet) Fragrance/Parfum (and) Lilial (and) Hydroxycitronellal | 0.20 |
Procedure | |
In the main vessel, add phase A ingredients one by one while heating to 75°C. Mix well between each addition until smooth. In a side beaker, mix phase B and heat to 75°C. At 75°C, add phase B into A and homogenize until smooth. Premix phase C at RT until clear and uniform and add it to the main vessel at 60°C. Mix well. At 45°C, add phase D one by one and mix well between each addition. In a side beaker prepare phase E: at RT, sprinkle Natrosol in water andmix well while heating at 60°C. Then cool down phase E under mixing. At 30°C, add phase E and mix until smooth. At RT, add phase F and mix wellStop at 25°C. | |
Properties | |
Appearance—White emulsion; pH—4.8 – 5.3; Viscosity(D0): 30000–40000 cps (Brook eld RVT/ Spindle B/5 RPM/ 1 minute/25°C) | |
More Information | |
Ashland, Inc. Tel: 859-815-3333 Email: personalcare@ashland.com Website: www.ashland.com |