Phase A | |
Deionized water | q.s. |
Versene Na2 Crystals (The Dow Chemical Co.) (Disodium EDTA) | 0.10 |
DermiVeil (Oat Cosmetics) (Hordeum vulgare powder) | 5.00 |
Phase B | |
1,3-Butylene Glycol Natural (DKSH) (Butylene glycol ) | 3.00 |
Euxyl PE 9010 (schülke & mayr) (Phenoxyethanol (and) ethylhexylglycerin) | q.s. |
Phase C | |
Emulsun (Floratech) (Hydrogenated sunflower seed oil polyglyceryl-3 esters (and) hydrogenated sunflower seed oil glyceryl esters (and) cetearyl alcohol (and) sodium stearoyl lactylate) | 5.00 |
Cutina GMS V (BASF) (Glyceryl stearate) | 0.80 |
Floraesters 15 (Floratech) (Jojoba esters) | 3.50 |
Floraesters 20 (Floratech) (Jojoba esters) | 3.50 |
Floraesters 60 (Floratech) (Jojoba esters) | 2.50 |
Carnauba Wax SP 63 (Strahl & Pitsch) (Copernicia cerifera (carnauba) wax) | 0.35 |
Sweet Almond Oil (ProTec Boranica) (Prunus amygdalus dulcis (Sweet almond) oil) | 2.00 |
Oat Lipid E (Oat Cosmetics) (Avena sativa (oat kernel) oil) | 1.00 |
Cetiol MM1 (BASF Corp.) (Myristyl myristate) | 4.00 |
Phase D | |
Aquafirm N (Oat Cosmetics) (Lactobacillus ferment (and)avena oat cosmetics sativa kernel extract (and) sodium benzoate (and) potassium sorbate ) | 2.00 |
Procedure | |
Combine the ingredients of phase A at room temperature with rapid mixing. Once completely dispersed, heat to 75-80°C. Add the ingredients of phase B to A with rapid mixing until dispersed. Combine all ingredients of phase C in a separate vessel, start heating to 75-80°C, and slowly mix until uniform. Add the ingredients of phase C to phase AB at 75-80°C with rapid mixing, followed by homomixing briefly. Shift the mixture to moderate-slow propeller mixing and begin cooling to 40°C. Add phase D at 40°C with slow mixing until dispersed. Stop mixing when the mixture becomes uniform. | |
Properties | |
pH—6–7; Viscosity—50 - 250kcP. | |
More Information | |
Floratech Website: www.floratech.com |