Phase A | |
KSG-710 (Dimethicone (and) Dimethicone/Polyglycerin-3 Crosspolymer) | 5.00 |
USG-1011 (Undecane (and) Tridecane (and) Dimethicone/Vinyl dimethicone crosspolymer) | 2.00 |
KF-6105 (Lauryl polyglyceryl-3 Polydimethylsiloxyethyl dimethicone) | 2.00 |
SPD-Z7L (Zinc oxide (and) Dimethicone (and) Polyglyceryl-3 Polydimethylsiloxyethyl dimethicone (and) Triethoxycaprylylsilane) | 25.00 |
SPD-T5L (Dimethicone (and) Titanium dioxide (and) Polyglyceryl-3 polydimethylsiloxyethyl dimethicone (and) Aluminum hydroxide (and) Stearic acid | 15.00 |
Undecane & Tridecane | 3.00 |
Phase B | |
DI Water | 38.30 |
1,3 Butylene glycol | 5.00 |
Ethanol | 3.00 |
Sodium chloride | 0.50 |
Sodium citrate | 0.20 |
Phase C | |
KSP-105 (Vinyl dimethicone/Methicone silsesquioxane crosspolymer) | 1.00 |
Procedure | |
Combine Phase A and mix well using a dispersing blade until smooth and uniform. In a separate vessel, combine Phase B and mix well. Emulsify by adding Phase B to Phase A under low shear (~450-900 rpm). Then increase speed to 2000 rpm for three minutes. Add Phase C at a lower speed (~1400 rpm) and mix well until homogenous. | |
Properties | |
Stability: Freeze/thaw- 3 cycles (-20°C/RT): Passed. - 4°C, 25°C, 40°C and 50°C (3 months): Passed. Characteristics/Appearance: White lotion. 24-hour Viscosity: Brookfield Heliopath RVT Spindle C, Speed 5, 1 minute @ 25°C ~ 54,000-59,000 cps. | |
More Information | |
Shin-Etsu Silicones for Personal Care www.shinetsusilicones.com |