Phase A-1 | |
KSG-210 (Dimethicone (and) Dimethicone/PEG-10/15 Crosspolymer) | 3.00 |
KSG-18A (Diphenylsiloxy Phenyl Trimethicone (and) Dimethicone/Phenyl Vinyl Dimethicone Crosspolymer) | 4.00 |
KF-6038 (Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone) | 3.00 |
Disteardimonium Hectorite | 0.80 |
DM-Fluid-2cs (Dimethicone) | 12.70 |
Isotridecyl Isononanoate | 4.00 |
Ethylhexyl Methoxycinnamate | 7.50 |
KF-56A (Diphenylsiloxy Phenyl Trimethicone) | 0.50 |
Phase A-2 | |
KTP-09 Pigments (Triethoxysilylethyl Polydimethylsiloxyethyl Hexyl/Dimethicone (and) Alumunium Hydroxide; CI 77891 (KTP-09W) 8.12%, CI 77492 (KTP-09Y) 1.32%, CI 77491 (KTP-09R) 0.36%, CI 77499 (KTP-09B) 0.20%) | 10.00 |
Titanium Dioxide (and) Aluminum Hydroxide (and) Stearic Acid) | 5.00 |
KF-56A (Diphenylsiloxy Phenyl Trimethicone) | 4.50 |
KF-6115 (Lauryl polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone) | 1.00 |
Phase A-3 | |
KSP-100 (Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer) | 2.00 |
Phase B | |
DI Water | 35.60 |
Butylene glycol | 5.00 |
Sodium Chloride | 1.00 |
Sodium Citrate | 0.20 |
Phenoxyethanol | 0.20 |
Procedure | |
In the main vessel, combine all of the phase A1 except for the distearimonium hectorite. Under a dispersing blade, sprinkle in the disteardimonium hectorite, then mix under moderate shear for 10-15 minutes. Premix phase A2 using a three roller mill. Add phase A2 followed by phase A3 and mix well until smooth and uniform. In a side vessel, combine phase B until salt has dissolved. Emulsify by adding phase B to phase A under low shear ~700-1,000 rpm then increase speed up to 3,000 rpm for 3 minutes. | |
Properties | |
Appearance: Medium beige cream. Viscosity: Brookfield RV Spindle #5, Speed 20, 1 min @ 25°C-24h ~13,000 cps. | |
More Information | |
Shin-Etsu Silicones for Personal Care www.shinetsu.co.jp/en/ |