Phase A-1 | |
USG-1010 (Dimethicone (and) Dimethicone/Vinyl dimethicone crosspolymer) | 5.00 |
KF-6028 (PEG-9 Polydimethylsiloxyethyl dimethicone) | 1.50 |
DM-Fluid-A-6cs (Dimethicone) | 3.68 |
DM-Fluid-1.5cs (Dimethicone) | 6.96 |
Phase A-2 | |
KSP-105 (Vinyl dimethicone/Methicone silsesquioxane crosspolymer) | 2.00 |
Silica | 1.00 |
Phase B | |
DI Water | 20.75 |
Butylene Glycol | 2.00 |
Ethanol | 5.00 |
Sodium Chloride | 0.50 |
Sodium Citrate | 0.20 |
Phase C-1 | |
SPD-T5L (Dimethicone (and) Titanium dioxide (and) Polyglyceryl-3 Polydimethylsiloxyethyl dimethicone (and) Aluminum hydroxide (and) Stearic acid) | 20.00 |
Phase C-2 | |
SPD-Z7L (Zinc oxide (and) Dimethicone (and) Polyglyceryl-3 polydimethylsiloxyethyl dimethicone (and) Triethoxycaprylysilane) | 28.33 |
KF-6106 (Polyglyceryl-3 polydimethylsiloxyethyl dimethicone) | 2.00 |
Phase D | |
KTP-09 Pigments (Triethoxysilylethyl polydimethylsiloxethyl hexyl dimethicone (and) Aluminum hydroxide; CI 77492 (KTP-09Y) 0.53%, CI 7 7491 (KTP-09R) 0.07%, CI 77499 (KTP-09B) 0.02%) | 0.75 |
DM-Fluid-A-6cs (Dimethicone) | 0.33 |
Procedure | |
Combine A1 and mix well using a dispersing blade until smooth & uniform. Add A2 and mix until smooth and uniform. In a sep. vessel, combine B and mix with simple stirring. Emulsify by adding B to A around 700-900 rpm then increase speed to 2200 rpm for 3 min. Premix C2 in a separate vessel. Add C1 followed by C2 to the main vessel one at a time until homogenous. Add D (premixed with three roller mill) and continue mixing for 2 min. at 1100 rpm. | |
Properties | |
Appearance: Beige fluid lotion. 24-hr Viscosity: Brookfield Spindle RV3, speed 20, 1 min @ 25°C ~ 1,100-1600 cps. Stability: F/T 2 cycles (-20°C/RT): Passed; 4°C, 25°C, 40°C, 50°C-3 Months: Passed. | |
More Information | |
Shin-Etsu Silicones for Personal Care www.shinetsu.co.jp/en |