Acai Berry Smoothie Facial Lotion

12.05.18

< td>Deionized water
< td>Schercemol C) Ester (Lubrizol) (Cetyl ethylhexanoate)
< td>Sodium hydroxide (18%)
< td>Actiphyte Acai Berry GL (Lipotec SAU) (Glycerin (and) water (and) euterpe oleracea fruit extract)
< tr>

Phase A
59.65
Pemule n EZ-4U (Lubrizol) (Polymeric emulsifier (Acrylates/C10-30 alkyl acrylate crosspolymer)	0.30
Xa nthan gum	0.20
Disodiu m EDTA (10%)	1.00
Phenoxy ethanol (ICMD)	0.50
Glyceri n	5.00
Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol)	5.00
Red 33 (0.1%) (Sun Chemical)	1.00
Blue 1 (0.1%) (Sun Chemical)	1.00
Phase B
10.00
S chercemol 318 Ester (Lubrizol) (Isopropyl isostearate)	10.00
G lucate DO Emulsifier (Lubrizol) (Methyl glucose dioleate	0.50
G lucate SS Emulsifier (Lubrizol) (Methyl glucose sesquistearate)	0.50
Phase C
0.25
Phase D
2.00
A ctiphyte Pomegranate GL (Lipotec SAU) (Glycerin (and) water (and) punica granatum extract)	2.00
A ntarcticine Marine Ingredient C (Lipotec SAU) (Aqua (and) pseudoalteromonas ferment extract (and) caprylyl glycol)	1.00
G renade #971979 (Symrise) (Fragrance)	0.10
Procedure< /strong>
Part A: Disperse Pemulen EZ-4U polymeric emulsifier and xanthan gum in deionized water under agitation and continue mixing until uniform. Add ingredient 3–9 of part A successively into the batch and mix until uniform between each addition. Part B: In a separate vessel, premix Glucate SS emulsifier and Schercemol CO ester, and mix at 55–60°C until complete dissolution of Glucate SS emulsifier. Add Glucate DO emulsifier and Schercemol 318 ester into the vessel to decrease the temperature down to 40°C. Add Part B to the batch and homogenize with Ultra Turrax for 3 minutes at 3,000 rpm. Neutralize with sodium hydroxide (18%) to pH 5.0–5.5. Mix until uniform. Add Actiphyte extracts, Antarcticine marine ingredient, and fragrance successively into the main vessel and mix until uniform.
Properties
Appearance at RT—Violet lotion; Appearance at -20°C—Smoothie-li ke consistency; pH—5.0–5.5; Viscosity (mPa•s) Brookfield RVT Viscosimeter (Brookfield AMETEK, Inc.) spindle #5 @ 20 rpm, 25 °C @ 24 hours—7,000–12,0 00; Stability—Passed 1 month at 50 °C and 3 months at RT & 40 °C; Passed 20 cycles Freeze/thaw. Note—PEG-derived ingredients are not intentionally added in the manufacture.
More Information
Lubrizol Advanced Materials Tel: 800-379-5389, 216-447-5000 Website: : www.lubrizol.com/per sonal-care