| To
a suitable vessel,
add the disodium
EDTA to heated
deionized water
(35°C to 40°C)
with moderate mixing
with a marine blade.
When disodium EDTA
is dissolved, add
the color then
sprinkle the Avalure
Flex-6 polymer into
the vortex without
aeration. When
uniform, discontinue
heat and sprinkle
Carbopol Ultrez 30
polymer into vortex.
Mix until all solids
are dispersed. Part
B: When Part A is
uniform, partially
neutralize with
Sodium Hydroxide.
When uniform, add
Part C ingredients
in order, mixing
well in between
additions. Part D:
In a separate
vessel, add the
fragrance to the
Hydramol TGL ester
(may be necessary to
slightly warm the
TGL), mix until
uniform. When
uniform, add to main
vessel, mix well.
PART E: When
uniform, adjust pH
up into range with
Sodium
Hydroxide. |
Properties
|
<
tr>
Appearance-Light
green opaque gel;
pH—5.4 – 6.3;
Viscosity (mPa•s)
(Brookfield® RVT
DVII Viscometer
(Brookfield AMETEK,
Inc.) spindle #6 @
20 rpm, 1 minute,
RT)—10,000 –
16,000; Recommended
Packaging— Jar;
Stability—In
progress; Polymer (%
TS)—0.5. |
More
Information
|
| Lubrizol
Tel.: 800-379-5389
or 216-447-5000
Website:
www.lubrizol.com/per
sonal-care |
