Phase A | |
2.50 | |
Deioniz
ed water | 54.93 |
Glucam
E-20 Humectant
(Lubrizol) (Methyl
gluceth-20) | 1.50 |
Scherce
mol DIA Ester
(Lubrizol)
(Diisopropyl
adipate) | 2.00 |
Scherce
mol CATC Ester
(Lubrizol) (Cocoyl
adipic
acid/trimethylolprop
ane copolymer) | 1.50 |
Scherce
mol NGDO Ester
(Lubrizol)
(Neopentyl glycol
diethylhexanoate) | 1.00 |
Parsol
MCX (DSM)
(Ethylhexyl
methoxycinnamate) | 7.00 |
TSF
451, 350 cS
(Momentive)
(Dimethicone) | 2.00 |
Glucam
P-20 humectant
(Lubrizol) (PPG-20
methyl glucose
ether) | 1.00 |
Capryli
c/capric
triglyceride | 1.00 |
Transcu
tol CG
(Gattefossu00c3u00a9
)
(Ethoxydiglycol) | 0.50 |
Coloron
a Carmine Red
(Merck) (Mica (and)
titanium dioxide
(and) carmine) | 0.50 |
Timiron
Silk Gold (Merck)
(Titanium dioxide
(and) mica) | 0.50 |
Flamenc
o Satin Pearl 3500
(BASF) (Mica (and)
titanium dioxide) | 1.00 |
Unipure
Red LC381 (Sensient)
(Iron oxides) | 0.16 |
Unipure
Yellow LC182
(Sensient) (Iron
oxides) | 0.16 |
Deioniz
ed water | 15.00 |
PC161
(Givaudan)
(Fragrance) | 0.50 |
Glydant
Plus Liquid (Lonza)
(DMDM hydantoin
(and) iodopropynyl
butylcarbamate) | 0.40 |
Phase B | |
0.50 | |
Phase C | |
1.75 | |
Phase D | |
4.00 | |
Phase E | |
0.60 | |
Procedure< /strong> | Disperse Novemer EC-2 Polymer in deionized water with moderate mixing. Add Glucam E-20 Humectant into the dispersion. Phase Bu2014In separate vessel, combine phase B ingredients with mixing. Phase Cu2014In a separate vessel, mix phase C ingredients and pass through a sieve (100 mesh) twice. Add pre-sieved phase C to phase B with mixing. Mix until uniform pigment dispersion is achieved. Slowly add phase B/C using continuous mixing to phase A. Mix until uniform. (For large batches, a side scraper must be installed). Phase Du2014In a separate vessel, dissolve Niacinamide in deionized water. Slowly add phase D to main batch with mixing. Mix until homogeneous. Phase Eu2014Add part E ingredients to batch one at time with mixing. Mix for 10-15 minutes or until the batch is homogeneous. Notes: A regular mixer is used to make a small batch of this formula, Stirrer DLH VELP Scientific. When making a large batch, it is ideal to use a roller mill. A more uniform color and texture will be formed if the whole batch is put through a roller mill 2-3 times. |
More Information | |
Appearanceu2014Tan (Tinted) Cream; pHu20146.5-7.5; Viscosity (mPau00b7s) (Brookfield DVII+ Viscometer spindle #6 @ 20 rpm, 25u00a0°C @ 24 hours)u201410,000-15 ,000; Yield Value (dyn/cmu00b2)u201410 0-200; SPF Static: 20 and SPF Very Water resistant (after 80 minutes immersion)u201418 (SPF determined by In Vitro testing using the Labsphere UV-1000S Transmittance Analyzer); Stabilityu2014Passed 3 months at RT & 45°C and Passed 5 freeze/thaw test cycles; Recommended Packagingu2014Pump with bottle or tube. | |
Lubrizol
Advanced
Materials 800-379-5389
or 216-447-5000 Website: www.lubrizol.com/p ersonalcare |
Cookies help us to provide you with an excellent service. By using our website, you declare yourself in agreement with our use of cookies.
You can obtain detailed information about the use of cookies on our website by clicking on "More information”.
Copyright © 2024 Rodman Media. All rights reserved. Use of this constitutes acceptance of our privacy policy The material on this site may not be reproduced, distributed, transmitted, or otherwise used, except with the prior written permission of Rodman Media.