< td>Deionized water
< td>Tetrasodium EDTA (Ruger Chemical) (Tetrasodium EDTA)
< td>Carbopol 980 (Lubrizol)
< td>Preservative
< td>TEA, 99% (Ruger Chemical Co.) (Triethanolamine)
< td>Zilgel VV (Presperse, Inc.) (Glycerin (and) sodium polyacrylate)
< td>Deionized water
< td>Hyaluronic acid (1% solu0092n) (Lipo Chemical) (Sodium hyaluronate)
< td>Deionized water
< td>TEA, 99% (Ruger Chemical) (Triethanolamine)
< tr>< tr>

Phase A
65.90
Laponi te XLG (Southern Clay) (Sodium magnesium silicate)	0.20
Liponic EG-1 (Lipo) (Glycereth-26)	3.00
Preserv ative (Lipo Chemicals)	q.s.
LipoLig ht OAP/PVA (Lipo Chemicals) (Nylon-12 fluorescent brightener 230 salt (and) polyvinylalcohol crosspolymer)	3.00
Phase B
0.10
Phase C
0.30
Phase D
q.s.
Phase E
0.50
Phase F
10.00
Phase G
1.00
Phase H
1.00
Phase I
15.00
Phase J
q.s.
Procedure< /strong>
Mix the water from phase A with high-speed propeller agitation. Slowly sprinkle in the remaining phase A ingredient, mix until clear. Add phase B ingredients to phase A and keep mixing speed on high. Slowly sprinkle in phase C ingredient with high speed propeller mixing. Mix until free of any lumps and batch is homogeneous. Mixing speed can now be reduced and phase D ingredient added with mixing. Heat the batch to 75°C with medium speed propeller mixing. Once batch is at 75°C and uniform, then the batch can be slowly cooled to 60°C. Add phase E to batch. Batch will thicken and continue mixing until clear and uniform. Continue slow cooling of batch and add phase F with mixing. At 35°C, add premixed phase G ingredients to batch with mixing. Add phase H ingredient to batch, mix until dispersed completely. Add premixed phase I slurry, that was mixed with high-speed propeller agitation, to the batch and mix until completely dispersed. Batch will turn white color. If necessary, adjust pH to within specification using phase J.
Properties
s + 10%; Stabilityu201430 days at 50°C.
More Information
Lipo Chemicals 973-345-8600 Fax: 973-345-8365 Website: www.li pochemicals.com< /td>