Phase A | |
PureSyn 2 (Sandream Impact) (Hydrogenated Polydecene) | 15.94 |
Jarcol I-20CG (JarChem) (Octyldodecanol) | 10.07 |
Jeenate 5H (Jeen)(Polyethylene) | 8.95 |
Microcrystalline Wax SP-16W-P (Strahl and Pitsch) (Microcrystalline Wax) | 8.95 |
Floraesters 15 (Floratech) (Jojoba Esters) | 7.83 |
NOO Crystal (Sandream Impact) (Octyldodecyl Oleate, Tocopheryl Acetate) | 6.80 |
JeeChem CTG (Jeen) (Caprylic Capric Triglyceride) | 5.59 |
ClearSyn 150 (Sandream Impact) (Hydrogenated Polydecene) | 2.80 |
NF White Beeswax (Koster Keunen) (Beeswax) | 1.12 |
Vitamin E Acetate (Sandream) (Tocopheryl Acetate) | 1.10 |
Phase B | |
Propyl Paraben (Sandream Impact) (Propyl-4-Hydroxybenzoate) | 0.11 |
Methyl Paraben (Sandream Impact) (Methyl 4-Hydroxybenzoate) | 0.34 |
Phase C | |
Sachet MV Gold (Sandream) (Synthetic Fluorphlogopite, TiO2, Tin Oxide, Manganese Violet, Triethoxycaprylylsilane) | 20.00 |
Phase D | |
Fancol ID-CG (Elementis) (Isododecane) | 8.00 |
Sansil 200S (Sandream Impact) (Dimethicone, Dimethicone/Vinyl Dimethicone Crosspolymer) | 2.40 |
Procedure | |
Preheat Phase A to 90°C in a glass beaker and propeller mix until solution is dissolved and homogeneous. Add Phase B to A and mix under propeller agitation until base is clear and uniform. Slowly add Phase C to A & B until colorant is completely dispersed. Premix Phase D and add to Phase A, B, and C. Stir until incorporated, lowering heat to 80°C. Do not mix rapidly to avoid air entrapment. Pour into desired lipstick molds, freeze and demold after 10 minutes. | |
More Information | |
Sandream Impact Tel: 973-822-3077 Website: www.sandreamimpact.com |