Phase
A |
<
td>Deionized
water
35.30 |
Endino
l SCS (Coast
Southwest) (Sodium
coco-sulfate)
| 8.00 |
NaOH
(30% aq.) w/w
(Sodium
hydroxide)
| q.s. |
Phase
B |
<
td>Jojoba Oil (Coast
Southwest, Jojoba
Desert) (Simmondsia
chinensis (jojoba)
seed oil)
8.00
|
C
oconut Oil (Cocos
nucifera (coconut)
oil)
| 9.00 |
Amla
Oil (Coast
Southwest,
International
Cosmetic Science
Centre) (Emblica
officinalis (amla)
fruit extract and
sesamum indicum
(sesame) seed
oil)
| 9.00 |
Rose
Hip Oil (Coast
Southwest,
International
Cosmetic Science
Centre) (Rose canina
(rose hip) seed
oil)
| 4.00
|
Y
angu Oil (Coast
Southwest,
International
Cosmetic Science
Centre) (Calodendrum
capense seed oil)
| 4.00
|
G
lossamer L6600
(Coast Southwest,
Inc.)(Brassica
campestris/aleurites
fordi oil
copolymer)
| 1.00
|
Phase
C |
<
td>Olivatis 19
(Coast Southwest,
Inc., Medolla
Iberia) (Olive oil
polyglyceryl-6
esters,
phospholipids)
2.00
|
O
livatis 18 (Coast
Southwest, Inc.,
Medolla Iberia)
(Olive oil
polyglyceryl-6
esters, sodium
stearoyl lactylate,
cetearyl)
| 4.00
|
Phase
D |
<
td>Kisameet Glacial
Clay (Coast
Southwest, Kisameet)
12.00 |
Phase
E |
<
td>Lavender Oil
(Lavandula
angustifolia
(lavender) flower
oil)
1.00 |
Astader
m 200 (Coast
Southwest)
(Porphyridium
polysaccharide)
| 2.00
|
S
haromix Amplify AM25
(Coast Southwest,
Sharon Laboratories)
(Phenoxyethanol,
chlorophenesin,
caprylyl glycol,
didecyldimonium
chloride)
| 0.70
|
Procedure<
/strong> |
Phase A – In main
vessel, begin
mixing. Titrate the
water to the desired
pH and begin heating
the solution to
149-158°F
(65-70°C). Add the
Endinol SCS slowly
at 113-122°F
(45-50°C) to
prevent clumps and
agglomerates from
forming. Continue
heating to
149-158°F
(65-70°C). Phase B
– In a separate
vessel mix phase B
and begin heating to
149-158°F
(65-70°C). Phase C
– Add phase C to
phase B at
113-122°F
(45-50°C) and
continue heating to
149-158°F (65-
70°C). When both
phases reach
temperature, slowly
add phase BC to
phase A. Increase
speed as needed but
avoid introducing
air as much as
possible. Phase D
– While
maintaining
temperature, slowly
add phase D to phase
ABC. The solution
will appear
discontinuous at
first; allow to wet
out completely until
uniform. Once batch
is completely
uniform, discontinue
heat and allow the
batch to cool to
122-131°F
(50-55°C). Phase E
– Add phase E to
the desired pH range
and continue to cool
to 104°F (40°C).
Transfer the mixture
to holding vessel
and allow to congeal
for 24
hrs. |
Properties
|
<
tr>
pH—6.5 to 8.0;
Viscosity—N/A. |
More
Information
|
| Coast
Southwest, Inc.
Email:
info@coastsouthwest.
com • Website:
coastsouthwest.com |
